Installation and Operation Manual

80
Item
No.
Description Part No.
Quantity
805H 806H 807HE 808HE 809HE 810HE
7. Trim and Miscellaneous Controls
A
Limit, 140-220°F, Honeywell
L4080D1218 (EI & Standing Pilot);
L4080B1212 (EP)
80160251
80160474
--- 1 1 1 1 1
Immersion Well, ¾” NPT x 1½” Insul. Depth 80160426 1 1 1 1 1 1
Hydrostat 3200 with Sensor (805) 104873-01 1 --- --- --- --- ---
LWCO Well for Hydrostat 3200 (if used) 105203-01 1 --- --- --- --- ---
B Limit, Manual Reset, Honeywell L4006E1133 80160703 1 1 1 1 1 1
B1 Immersion Well, ¾” NPT x 3” Insul. Depth 80160452 1 1 1 1 1 1
C Temperature - Pressure Gauge 100282-01 1 1 1 1 1 1
C1 Nipple, 2 NPT x 10” w/Gauge Tapping 8061601 1 1 1 1 1 1
D Safety Relief Valve, ¾ NPT, 50 psi 81660302 1 1 1 1 1 1
D1 Nipple, ¾ NPT x 3½” 806600038 1 1 1 1 1 1
E Drain Valve, ¾ NPT, Conbraco 35-302-03 806603061 1 1 1 1 1 1
E1 Nipple, ¾ NPT x 3½” 806600038 1 1 1 1 1 1
E2 Coupling, ¾ NPT 806602561 1 1 1 1 1 1
F Blocked Vent Switch Replacement Assembly 6016058 1 1 1 1 1 1
G Flame Roll-out Switch 80160044 1 1 1 1 1 1
G1 Flame Roll-out Switch Mounting Bracket 7181612 1 1 1 1 1 1
H Junction Box 8136010 1 1 1 1 1 1
J
Control Center, Honeywell R8285D500
(Intermittent Circulation builds)
80160155U --- 1 1 1 1 1
K Transformer, 50VA (Continuous Circulation builds) 80160249 --- 1 1 1 1 1
L Ignition Module, Honeywell S8610M3009 100958-01 1 1 1 1 1 1
M
Vestibule Wiring Harness, Complete with Vent Damper
Bypass Plug (EI and Standing Pilot) (Not Depicted)
81316010 --- 1 1 --- --- ---
81316011 --- --- --- 1 1 1
N
J-Box to 3200 and Auxiliary Limit Wiring Harness
(not depicted)
81316017 1 --- --- --- --- ---