Brochure

ManualsBrandsBurnham ManualsIndirect Water Heaters80 Gallon Alliance Light Transport Indirect Water Heater w/ TPI Thermostat

Alliance

™

LT & SL

Indirect Water Heaters

Two long-life, corrosion

resistant tanks, featuring NEW

thermoplastic (LT) or traditional

hydrastone (SL) lining

• Impervious to water quality variations

• Minimal maintenance required

• No anode rod required

• Advanced TPI thermostat control

• 10-year residential warranty,

optional lifetime warranty available!

Easy, low cost installation

• Top connections, ﬂexible alignment

• Bolted topside coil access – no tank

draining

• Alliance LT offers lower weight, ease of

transport

Alliance SL

Four residential sizes:

27, 35, 50, & 70 gal.

plus NEW 70 gal. commercial

NEW Alliance LT

Three residential sizes:

30, 55, & 80 gal.

plus 80 & 119 gal. commercial

Summary of content (4 pages)

PAGE 1
Alliance LT & SL ™ Indirect Water Heaters Two long-life, corrosion resistant tanks, featuring NEW thermoplastic (LT) or traditional hydrastone (SL) lining • Impervious to water quality variations • Minimal maintenance required • No anode rod required • Advanced TPI thermostat control • 10-year residential warranty, optional lifetime warranty available! Easy, low cost installation Alliance SL Four residential sizes: 27, 35, 50, & 70 gal. plus NEW 70 gal.
PAGE 2
Alliance Indirect Water Heaters ™ A Lifetime of Abundant Domestic Hot Water There can be extensive demands for domestic (potable) hot water in both residential and commercial applications. Alliance LT and SL indirect-fired water heaters meet the need for domestic hot water with unique designs and uncompromising reliability. Indirect Water Heaters vs. Conventional Direct-Fired Water Heaters All “tank” water heaters store hot water to be used for household needs.
PAGE 3
The Science of Protection Thermoplastic Lining (Alliance LT) The greatest enemies of any water heater are corrosion and rust. The best defense against those enemies is to avoid tank materials that can rust or corrode. By utilizing a proprietary double-bonded thermoplastic tank liner, the Alliance LT can handle even the most aggressive water Phase 1 The vessel filled with water.
PAGE 4
Alliance Indirects: Technical Information Model AL30LT AL55LT Alliance LT Performance Specifications Boiler Water First Hour1 Boiler Continuous Flow (gal./hr.) 2 Output (6 GPM @ Head 200°F) Flow Rate Loss Storage BTU/hr. (gal./min.) (ft./w.c.) (gallons) @115°F @140°F 30 295 225 150,000 6 7 55 325 255 150,000 6 7 Physical Specifications Standby Heat Loss (°F/hr.) 0.72 0.72 Height (in.) 40.5 41 Diameter (in.) 22.75 28 Shipping Weight (lbs.) 70 95 AL80LT 80 350 280 150,000 6 7 0.56 53.