Alpine Installation, Operating, and Service Instructions

106
103448-10- 6/18
X. Operation F. Changing Adjustable Parameters
1. Entering Adjust Mode
The Control is factory programmed
to include basic modulating boiler
functionality. These settings are
password protected to discourage
unauthorized or accidental changes to
settings. User login is required to view
or adjust these settings:
- Press the “Adjust” button on the
“Home” screen.
- Press the “Adjust” button on the
Adjust Mode screen or Press
“Service Contact” for service
provider contact information.
- Press “Login” button to access
password screen.
- Press 5-digit display to open a
keypad. Enter the password
(Installer Password is 86) and press
the return arrow to close the keypad.
Press the “Save” button.
- Press the “Adjust” button to enter
Adjustment mode.
F. Changing Adjustable Parameters
2. Adjusting Parameters
Editing parameters is accomplished as follows:
Figure 42: Adjust Mode Screens