Alpine Installation, Operating, and Service Instructions

103448-10 - 6/18 9
I. Product Description, Specifications and Dimensional Data (continued)
Table 2: Ratings
I. Product Description, Specifications and Dimensional Data (continued)
Alpine Series Gas-Fired Boilers
Model Number
Input (MBH)
Heating Capacity
(MBH)
Net AHRI Ratings Water
1
(MBH)
AFUE
(%)
Min. Max.
ALP080B 16 80 72 63 95.0
ALP105B 21 105 96 83 95.0
ALP150B 30 150 136 118 95.0
ALP210B 42 210 194 169 95.0
ALP285B 57 285 262 228 95.0
Ratings shown are for installations at sea level and elevations up to 2000 ft. For elevations above 2000 ft., the boiler will
naturally derate by 2.5% for each 1000 ft. above sea level - applicable to ALP080B thru ALP210B.
ALP285B rating is for installation at sea level and elevations up to 7800 ft. For elevations above 7800 ft., the boiler will
naturally derate by 1.8% for each 1000 ft. above sea level.
1
Net AHRI Water Ratings based on piping and pickup allowance of 1.15. Consult manufacturer before selecting boiler
for installations having unusual piping and pickup requirements, such as intermittent system operation, extensive piping
systems, etc.
II. Unpacking Boiler
A. Move boiler to approximate installed position.
B. Remove all crate fasteners.
C. Lift and remove outside container.
D. Remove boiler from cardboard positioning sleeve
on shipping skid.
E. Move boiler to its permanent location.
Do not drop boiler.
CAUTION
Installation of this boiler
should be undertaken only by trained and
skilled personnel from a qualified service
agency.
WARNING