Install Instructions

114 103448-08- 9/16
“Press”
Contractor
Setup
button to access the following parameters:
X. Operation F. Changing Adjustable Parameters (continued)
Factory Setting Range / Choices Parameter and Description
Contractor Name User dened Contractor Name
Address Line 1 User dened Contractor Address Line 1
Address Line 2 User dened Contractor Address Line 2
Phone User dened Contractor Phone
“Press”
Manual
Control
button to access the following screen:
The Manual Speed Control speed screen allows the technician to set ring rate at low or high speed for combustion testing.
Use Up and DOWN Arrows for More
Exit Screen without Saving
Clear Entire Field
Backspace
Save Field and Exit
Save
Press box to input contractor information.
Contractor Name
<
>
i
Bill Smith
1
7
6
5
4
3
2
A
ES
C
D
C
B
8
CL
R
7
BS
8
Enter Contractor Information
Bill Smith
Press SAVE button to store revisions.
For Service Contact:
Bill Smith
12 Victory Lane
Plainview, New York
516 123-4567
Example Screen
NOTE
Selecting “Low” or “High”
locks (manual mode) ring
rate at min or max Rate %.
After combustion testing select
“Auto” to return the boiler to
normal operation.
NOTE
Rate % can only be set
when the boiler has heat
demand and is released to
modulate.
Press “Auto” to
return ring rate
to Automatic
Mode
“Press” “High” to select
manual ring rate control
and Central Heat Maximum
ring rate %
“Press” “Low” to select
manual ring rate control
and Minimum ring rate %