Install Instructions

146 103448-08- 9/16
Figure
Number
Page
Number
Description
Section I - Product Description, Specications & Dimensional Data
Figure 1A 6
Models ALP080B through ALP210B (Floor Mounted)
Figure 1B 7
Models ALP080B through ALP210B (Wall or Floor Mounted)
Figure 1C 8
Model ALP285B (Floor Mounted)
Section III - Pre-Installation & Boiler Mounting
Figure 2A 11 Clearances To Combustible and Non-combustible Material, Floor Standing
Figure 2B 12 Clearances To Combustible and Non-combustible Material, Wall Mounted
Figure 2C 13 Wall Mounting Hole Location / Layout
Figure 2D 14 Bottom Mounting Bracket Installation / Boiler Wall Mounting
Figure 2E 15 Access Panel & Gasket Installation
Figure 3 16 Stacking Boiler Attachment Bracket Placement
Section IV - Venting
Figure 4 17
Location of Vent Terminal Relative to Windows, Doors, Grades, Overhangs, Meters and Forced Air
Inlets - Two-Pipe System Vent Terminal (Shown) Two-Pipe System Air Intake Terminal (Not Shown)
Figure 5 23 Direct Vent - Vent and Air Intake Horizontal Sidewall Terminations
Figure 6A 23 Direct Vent - Staggered Vent and Air Intake Horizontal Sidewall Terminations
Figure 6B 23 Direct Vent - Snorkel Vent and Air Intake Horizontal Sidewall Terminations
Figure 6C 23 Split Rigid Vent Option
Figure 6D 24
Direct Vent - Horizontal Two-Pipe Venting/Air Intake with IPEX Low Prole or DiversiTech HVENT
Terminal
Figure 6E 24 Installation of IPEX Low Prole Terminal thru Sidewall
Figure 6F 24 Installation of DiversiTech HVENT Terminal thru Sidewall
Figure 6G 24
Direct Vent - Horizontal Two-Pipe Venting/Air Intake with IPEX FGV or DiversiTech CVENT
Concentric Terminal
Figure 6H 25 Cutting IPEX FGV or DiversiTech CVENT Concentric Terminal
Figure 6J 25 Installation of IPEX FGV or DiversiTech CVENT Concentric Terminal thru Sidewall
Figure 7A 25 Direct Vent - Vent and Air Intake Vertical Terminations with Flat Roof
Figure 7B 26
Direct Vent - Vertical Two-Pipe Venting/Air Intake with IPEX FGV or DiversiTech CVENT Concentric
Terminal
Figure 7C 26 Installation of IPEX FGV or DiversiTech CVENT Concentric Terminal thru Roof
Figure 8 27 Direct Vent - Vent and Air Intake Vertical Terminations with Sloped Roof
Figure 9 27
Field Installation of CPVC/PVC Two-Pipe Vent Connector with Factory Installed Flue Temperature
Sensor and Sensor Cap - Floor Mounted Boiler Builds
Figure 10A 27 Near-Boiler Vent/Combustion Air Piping - Floor Mounted Boiler Builds
Figure 10B 28 Field Installation of CPVC Vent Pipe - Wall Mounted Boiler Builds
Figure 11 28 CPVC/PVC Expansion Loop and Offset
Figure 12 33 Wall Penetration Clearances For PVC Vent Pipe
Figure 13 33 Rodent Screen Installation, Horizontal Vertical, Straight Vent Terminals
Figure 14 35 Vent System Field Modication to Install PVC to PP Adapter (M&G/DuraVent)
Figure 15 35 Field Installation Procedure to Accept Polypropylene Vent Piping - Wall Mounted Boiler
Figure 16A 36 Flexible PP Vent in UNUSED Masonry Chimney with Separate Combustion Air Intake
Figure 16B 37 Flexible PP Vent in UNUSED B-vent with Separate Combustion Air Intake
Appendix A - Figures