User's Manual
Bottom Blowdown Separator
• Eliminate precipitated solids from the bottom of the boiler.
• Cools blowdown to 140°F or below before dumping to
drain by introducing cooling water via an aftercooler.
• ASME Section VIII “UE” stamped separator
(“U” stamp available as option).
• Sized to accommodate ow based on boiler blowdown
line size and boiler operating pressure.
• Model Range:
14" diameter x 22" through 56" in height
for standard boilers.
(10" diameter x 14" high option available
for boilers under 1000 #/hour).
• Modular conguration to meet customer requirements
includes: separator, legs (or wall bracket), aftercooler,
temperature regulating valve and thermometer.
• Can be custom congured to meet customer requirements.
• Stainless steel striking plate standard and internal steel
restrictor plates standard.
• Multiple separators with manifold for high pressure
applications available.