K2 Installation Manual

87
107672-03 - 5/18
Figure 10.6: Proper Installation of Header Sensor
X. Wiring (continued)
Primary/Secondary Tee
Sensor Clip
Header Temperature Sensor
(Honeywell 32003971-003)
(U.S.B.C. P/N: 103104-01)
Close Nipple
(Locate Header Sensor
As Close As Possible
To Downstream Tee)
Well Should Extend Into
Header Flow As Far As
Possible. Use Extension
Only If Necessary.
Honeywell
Immersion Well