Install Instructions

22
Figure 21: Operating Instructions
i. Remove Main Burners per procedure in
Section VIII: Service.
ii. Removegasorices.Drillone(1)drillsize
larger(drillsizeisstampedonorice,orsee
Key No. 4D).
iii. Reinstallgasoricesandmainburners.
Measure input rate.
6. Recheck Main Burner Flame.
7. Returnothergas-redappliancestoprevious
conditions of use.
M. Clean Heating System. Oil from new piping
connections and sediment in existing piping must be
removed from system to prevent unsteady water line
and carry-over of entrained water into supply main.
VII. System Start-up (continued)