BURR KING MFG. CO., INC 1220 Tamara Lane Warsaw, MO 65355 www.burrking.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 s (800) 621-2748 FAX (660) 438-8991 June 21, 2007 LETTER OF AUTHENTICITY This letter is to certify that all Burr King Belt grinders, Disc grinders, Polishing machines Vibra King Chambers and Bowls are manufactured and assembled in the United States of America. (Tariff number 847990 criterion A) Don Mac Carthy President See our catalog at www.burrking.com contact us at info@burrking.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 January 2012 Installation/Operating instruction for the FilterPAK 4001 The FilterPAK 4001 provides filtration of vibratory fluids via replaceable filter bags, gravity settling, and a flow over baffle. The replaceable filters are available from Burr King Manufacturing in 5, 10, 15, 25, 50, and 100-micron meshes. Select finer mesh (i.e. 10 micron vs.
Operating tips for your FilterPAK 4001 1. During the first few hours of operation after the installation of new media: • The drain tube from the vibratory chamber to the FilterPAK 4001 may plug. This is a consequence of the new media sloughing off edge particles that may not gravitate into the filter bag. Should you observe particles collecting in the clear drain hose tilt the hose to allow the particles to flow into the FilterPAK 4001.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 January 2012 FilterPak 4001 – Installing Fittings on a 150/200 Vibratory Bowl Remove supplied plugs with a 9/16” wrench. Using supplied nylon insert nut tighten against the bowl with a 9/16” wrench Install 90° inlet fitting to upper hole. Install drain plug thru the bottom of the bowl making sure that the rubber o-ring is properly seated to the bowl.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 Technical note: Subject: Burr King Filter PAK 4000, filters October 2000 The Burr King Filter PAK 4000 is a closed loop compound delivery system that incorporates a high quality polyester felt membrane filter. The filter is rated at 25 gallons per hour, well over the necessary flow rate for most vibratory systems. The filter is also rated for a pressure head of 12 feet (6 PSI).
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM – info@burrking.com Celebrating 60 Years in 2011 (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 Effective: March 15, 2011 Filter PAK Filter Prices Filters sold by micron mesh size in kit quantities of 5, 10, & 25 Fine micron best for porcelain media, medium micron best for ceramic, coarse micron best for plastic medias PART NO.
