BURR KING MFG. CO., INC 1220 Tamara Lane Warsaw, MO 65355 www.burrking.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 June, 2007 Burr King Manufacturing Company. Inc. warrants the below product to be free in material and workmanship. The period of warranty is 1 year (90 days for vibratory bowls of 20 quart and lesser volume) from the date of purchase.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 August 29, 2007 LETTER OF AUTHENTICITY This letter is to certify that all Burr King Belt grinders, Disc grinders, Polishing machines Vibra King Chambers and Bowls are manufactured and assembled in the United States of America. (Tariff number 847990 criterion A) Don Mac Carthy President See our catalog at www.burrking.com contact us at info@burrking.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 December 2005 Operating instructions for the Model 1050 tube finisher The Model 1050 tube finisher is a single spindle finishing machine. It is designed to use cotton, nylon, flap, wire, and other finishing and/or de-burring wheels. Your Model 1050 may be fixed speed (single or three phase), or variable speed single phase depending on the configuration ordered.
8. All three phase electrical installations must include a magnetic starter. Magnetic starters protect motors from “double phasing”, overheating, etc. thereby reducing the risk of damage to the equipment and/or fire hazard to your facility. Three phase motors are not warranted if used without a magnetic starter or other suitable device. Functional operating instructions for the Model 1050 buffer The Model 1050 was fully tested and verified to comply with requirements prior to shipping from the factory.
Note that the 1050 machine can accommodate finishing wheels to 2 inches in width but never larger than 10 inches in diameter. When mounting a wheel on the machine adjust the position of the wheel in respect to the angle steel work support. Loosen the bolts that secure the motor stand and the frame brace and slide the machine left or right as necessary to center the wheel. There are no other maintenance actions required. All bearings are sealed for life and require no lubrication.
43 1050 32 3 BURR KING PARTS LIST 4 8 7 6 5 1220 TAMARA LANE WARSAW, MO.
1050 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 2 3 4 5 6 99-0024 99-0025 MOTOR 908 1-0003 17 BASE PLATE ASSEM.
MAG STARTER BURR KING PARTS LIST 1220 TAMARA LANE WARSAW, MO.
BURR KING 1220 TAMARA LANE WARSAW, MO. 65355 ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 MAG STARTER PART NUMBER DESCRIPTION MB-4C BRACKET, MOUNTING, STARTER MOTOR CALL FACTORY FOR PART NUMBER 4 WASHER, 5/16 SAE ZINC PLTD 37 BOLT, 5/16-18x3/4 HEX HEAD 5 WASHER, 1/4 AN 209 SCREW, 1/4-20 X 3/4 ALLEN HEAD 4-0013 NUT, KEP, 1/4-20 MS2A3 3/4HP-1HP, 220V MS4A3 3/4HP-1HP, 440V MS2B3 1.5HP-3HP, 220V MS4B3 1.5HP-3HP, 440V 775 CONNECTOR, 3/8", STR, LIQ. TIGHT 776 CONNECTOR, 3/8", 90 DEG, LIQ.
VARI SPEED BURR KING SINGLE PHASE 1220 TAMARA LANE WARSAW, MO. 65355 3/4-1 HP 1.
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 VARI SPEED PART NUMBER MB-4C 941-3 5-0032 4 209 5 4-0013 100B-1725C 150B-1725C 37 015-1 017 020 864-1 775 776 643 862-3 DESCRIPTION BRACKET, MOUNTING, STARTER BRACE, MB4 SUPPORT WASHER, 1/4, LOCK, SPLIT, PLTD WASHER, 5/16 SAE ZINC PLTD SCREW, 1/4-20 X 3/4 ALLEN HEAD WASHER, 1/4 AN NUT, KEP, 1/4-20 1 HP MOTOR 1.5 HP MOTOR BOLT, 5/16-18x3/4 HEX HEAD 120V CORD 220V CORD CONDUIT 3/8" LIQUIDTIGHT CONT. 115/220V 0.75-1HP CONNECTOR, 3/8" STR, LIQ.
MODEL 1050 BURR KING WIRE WHEEL TUBE FINISHER 3 TAMARA LANE WARSAW, MO.