BURR KING MFG. CO., INC 1220 Tamara Lane Warsaw, MO 65355 www.burrking.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 June, 2007 Burr King Manufacturing Company. Inc. warrants the below product to be free in material and workmanship. The period of warranty is 1 year (90 days for vibratory bowls of 20 quart and lesser volume) from the date of purchase.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 s (800) 621-2748 FAX (660) 438-8991 June 21, 2007 LETTER OF AUTHENTICITY This letter is to certify that all Burr King Belt grinders, Disc grinders, Polishing machines Vibra King Chambers and Bowls are manufactured and assembled in the United States of America. (Tariff number 847990 criterion A) Don Mac Carthy President See our catalog at www.burrking.com contact us at info@burrking.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.CO M (660) 438-8998 s (800) 621-2748 FAX (660) 438-8991 February 2005 OPERATOR, and OPERATING AREA SAFETY Subject equipment includes Grinders, buffers, polishers, and other rotating equipment. Serious injury or death may occur if minimum safety precautions are not understood, and obeyed by operators and those other persons who may be in the immediate vicinity of the subject equipment.
Continued from page 1 of the work rest (or table) will permit passage of the work piece through the gap (nip point). Note, however, that certain alloys such as titanium may create conditions where grinding debris can accumulate in a tight gap creating a potential fire hazard. When in doubt consult with your safety officer. Failure to observe this warning may result in the work piece or other item being caught in this gap, and/or being forcibly ejected.
Continued from page 2 Occupational Noise Exposure Burr King products produce levels of noise consistent with their intended purposes. The level and spectral content of noise produced is dependent on the product type, the degree that the product is maintained in proper operating condition, the abrasive/media and accessories used, the specific application, and the surrounding environment.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 October 2007 Operating instructions for Models 150 and 200 VibraKING enhanced performance vibratory bowls ® The VibraKING 150 and 200 enhanced performance vibratory bowls are bench top, or stand mounted vibratory processing machines. The bowls are compatible with ceramic, plastic, shell, cob, and most other media types.
that could result in personal injury, or death. Use only clean water with recommended soaps in your VibraKING® bowl and associated accessories. • • • • • • • • • • If you intend to use dry media such as walnut shell, or corncob the bowl ports should be left plugged. If you intend to use manually induced fluids, the bowl ports should remain plugged.
Removing and replacing the bowl The bowl may be removed to empty, clean, maintenance, or other reasons. When replacing the bowl insure that the two bosses on the underside of the bowl span one of the rubber isolators on which the bowl rests. These bosses prevent the bowl from rotating during bowl operation. Insure that the bosses DO NOT rest on any isolator. Insure that the bowl is held down using the large flat washer and wing nut provided.
Warranty Burr King Manufacturing warrants the 150 and 200 against defects in material and/or workmanship for a period of ninety days after original customer purchase. This warranty is in lieu of all other warranties, either expressed or implied. Customer induced damage, miss-application, and/or abuse is not covered by warranty.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.
Formulations Formula Color Purpose Polish Made of high alumina and contains no abrasives. Use with burnishing compounds to burnish metals or with loose abrasives or compounds for deburring. These pins produce a high luster finish and are suitable for use in all types of finishing equipment.
Burr King Mfg., Inc. PREFORMED TUMBLING 1220 Tamara Lane AND VIBRATORY Warsaw, MO 65355 (660) 438-8998 (800) 621-2748 CERAMIC ABRASIVES Fax:(660) 438-8991 Note: Green and Grey fields are in stock. Non stock items 500lb.
Preformed Tumbling & Vibratory Ceramic Abrasives Compositions P-60 = Light cut, superior finish, leaves clean surface, good for aluminum parts. (78-80lbs.) P-40 = Good cut and wear life, excellent finish, ideal for general purpose use, economical (89 to 90 lbs. per cubic foot) P-20 = Fastest cut, for heavy deburring, matte finish. (85 to 90 lbs.
