BURR KING MFG. CO., INC 1220 Tamara Lane Warsaw, MO 65355 www.burrking.
BURR KING MFG. CO., INC. 1220 TAMARA LANE www.burrking.com WARSAW, MO 65355 (660) 438-8998 s (800) 621-2748 FAX (660) 438-8991 June, 2007 Burr King Manufacturing Company. Inc. warrants the below product to be free in material and workmanship. The period of warranty is 1 year (90 days for vibratory bowls of 20 quart and lesser volume) from the date of purchase.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 August 29, 2007 LETTER OF AUTHENTICITY This letter is to certify that all Burr King Belt grinders, Disc grinders, Polishing machines Vibra King Chambers and Bowls are manufactured and assembled in the United States of America. (Tariff number 847990 criterion A) Don Mac Carthy President See our catalog at www.burrking.com contact us at info@burrking.
BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998 (800) 621-2748 FAX (660) 438-8991 VibraKING model 25, 45, and 85 operating instructions December 2009 General description Models 25, 45, and 85 vibratory chambers use commonly available media to de-burr, polish, de-scale, or otherwise surface condition parts made from various materials.
Initial machine setup and operation CAUTION: This equipment is heavy. Observe good and safe practice when attempting to install, move, maintain, or otherwise work on it. Failure to observe this caution may create a safety hazard. Burr King recommends that this equipment be secured to a structurally sound floor. Securing the machine to the floor will not diminish performance. For portable applications (no bolt down) the machine feet should be used to assure there is uniform four-point contact with the floor.
Occupational Noise Exposure Burr King vibratory tubs produce levels of noise consistent with their intended purposes. The level and spectral content of noise produced is dependent on the tub size, the degree that the bowl is maintained in proper operating condition, the abrasive/media and accessories used, the specific application, use or not of the optional lid, and the surrounding environment.
Loading media and parts into the machine If you purchased a media starter kit from Burr King, install the media and compounds into the chamber using the prescribed quantities and mixtures. Otherwise follow the instructions provided. Do not exceed the media load prescribed for your machine. Machine M25 M45 M85 Ceramic media load 150 lbs. 250 lbs. 450 lbs. Part load 100 lbs. 225 lbs. 450 lbs. Max. total load 250 lbs. 475 lbs. 900 lbs.
Reference weight adjustments: 80% Drive – Ceramic Media 70% Drive – Plastic Media 60% Drive – Dry Media Factory Set-up on a M45 for Ceramic Notice the 2nd dot on the weights. Starting on the outside weight, align the set screw to the flat area of the shaft. Then begin to align the weight from there making sure that the left and right side are similar. To change to 70% drive adjust the weights so you can see three dots.
Wear proper clothing and personal protection equipment when operating your machine! Avoid fire and explosion hazards. The use of fluids other than water and Burr King specified soaps in your VibraKING chamber (or an associated fluid re-circulating system) may create a fire/explosion hazard that could result in personal injury, or death. Use only clean water with recommended soaps. Avoid eye damage, flesh burns, and/or poisoning. Many vibratory processing soaps, compounds, and media are acidic or caustic.
in concentrations up to 8 ounces per gallon of water; used as such it provides superior rust retardation. For special problems with rust or other staining consult with your metals supplier, or Burr King Manufacturing. 3. When de-scaling steel (i.e.) use a de-scaling agent such as BKD80. This compound is used in place of other soaps and mixed in ratios from 3 to 6 ounces/gallon of water.
• Vibratory processing creates sludge in the liquid supply system. This sludge is a natural result of the mechanical abrasion that occurs. The sludge may contain abrasive residue, part material residue, soap, or other materials that you may introduce into the process. This sludge should be processed and discarded in a manner that is acceptable to your local, and/or state environmental protection agencies.
Maintenance of your Burr King vibratory chamber Maintenance consists of cleaning the unit, assuring mechanical fasteners are secure, assuring the drive belt is properly tensioned, and occasionally lubricating the drive shaft bearings.
M25/ M45/ M85 BURR KING SCHEMATIC 1220 TAMARA LANE WARSAW, MO.
BURR KING 1220 TAMARA LANE WARSAW, MO. 65355 M25 ITEM NO. PART NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 3311-3 3314 3312 5-0023 4-0007 3300UCI-2 5-0014 3318 3307 3598 3599 15 9 3404 3406 3409 3317 3344 3330 3320 2-0015 M25 DESCRIPTION QTY. MAIN FRAME FOOT, MACHINE ISOLATOR 45 SHORE WASHER, 3/8 X 7/8, USS NUT, 3/8-16, ELASTIC LOCK GD 2 TUB, URETHANE WASHER, LOCK 3/8, INTERNAL STAR CLAMP, HOSE 3" TO 5" SCREW DRIVE PLUG, URETH.
BURR KING 1220 TAMARA LANE WARSAW, MO. 65355 M45 ITEM NO. PART NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 3311 3314 3312 5-0023 4-0007 3300UCI-5 5-0014 3318 3307 3598 3599 15 9 3404 3406 3409 3317 3347 31-1 3344 3315 3320 2-0015 M45 DESCRIPTION QTY.
BURR KING 1220 TAMARA LANE WARSAW, MO. 65355 M85 ITEM NO. PART NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 3311-2 3314 3312 5-0023 4-0007 3300UCI-3 5-0014 3318 3307 3598 3599 15 9 3404 3406 3409 3317 3348 31-1 3344-1 3349 3320-1 2-0015 M85 DESCRIPTION QTY. MAIN FRAME 1 FOOT, MACHINE 6 ISOLATOR 45 SHORE 8 WASHER, 3/8 X 7/8, USS 12 NUT, 3/8-16, ELASTIC LOCK GD 2 8 TUB, URETHANE 1 WASHER, LOCK 3/8, INTERNAL STAR 8 CLAMP, HOSE 3" TO 5" SCREW DRIVE 1 PLUG, URETH.
Formulations Formula Color Purpose Polish Made of high alumina and contains no abrasives. Use with burnishing compounds to burnish metals or with loose abrasives or compounds for deburring. These pins produce a high luster finish and are suitable for use in all types of finishing equipment.
Burr King Mfg., Inc. PREFORMED TUMBLING 1220 Tamara Lane AND VIBRATORY Warsaw, MO 65355 (660) 438-8998 (800) 621-2748 CERAMIC ABRASIVES Fax:(660) 438-8991 Note: Green and Grey fields are in stock. Non stock items 500lb.
Preformed Tumbling & Vibratory Ceramic Abrasives Compositions P-60 = Light cut, superior finish, leaves clean surface, good for aluminum parts. (78-80lbs.) P-40 = Good cut and wear life, excellent finish, ideal for general purpose use, economical (89 to 90 lbs. per cubic foot) P-20 = Fastest cut, for heavy deburring, matte finish. (85 to 90 lbs.
