User Guide This user guide includes information for the entire Veracity riflescope line. Please review thoroughly, and pay close attention to the details pertaining to your specific riflescope model.
Congratulations on choosing the Veracity® riflescope from Burris®. This premium riflescope will be your best asset in the field, helping you bag big game or quick varmints with precision reticles and high quality glass. Veracity riflescopes offer the following features: • Ballistic Compensation Reticles. Veracity Riflescopes feature the Ballistic E1 FFP and Ballistic E1 FFP Varmint reticles, both providing simple methods for determining holdover for distance and hold-off for wind drift at any magnification.
How to use the Veracity Riflescope Eyepiece Focusing The eyepiece can be focused so that the reticle appears sharp and black. Adjusting the focus is quick and easy to do, just follow this procedure: 1. Point the scope at the sky or a plain wall and take a quick glance through the scope. If the reticle appears sharp and black, no further adjustment is necessary. 2.
Windage/Elevation Adjustment for Multi-Turn Target Knobs with Zero Click Stop – Applies to 4x-20x and 5x-25x models – The Multi-Turn Target windage and elevation knobs are designed for precise adjustment and feature Zero Click Stop. The click value for each knob is indicated on the dial. For shooting at extreme distances, the elevation knob offers up to 15 MOA/rotation with multiple revolutions of adjustment.
NOTE: Windage adjustments are made with a multi-direction adjustment knob. Zero is set with an indexing mark to allow for left and right adjustments. Failure to zero at the index mark may result in limited windage adjustment. Proper Windage Zero Windage/Elevation Adjustment for E1 Hunter Knobs – Applies to 2x-10x and 3x-15x models – The low profile E1 Hunter Knobs feature a finger adjustment for both windage and elevation.
Mounting the Scope Veracity riflescopes require 30mm rings. We recommend using high-quality rings and bases, like the Burris Signature Rings or Xtreme Tactical Rings and Xtreme Tactical Bases. Quality components ensure that your scope will remain safely and securely mounted, and will provide the maximum accuracy. Use care when mounting your scope as damage caused by improper mounting is not covered by the Burris Forever Warranty. Care & Maintenance The Veracity riflescope is fully waterproof and fogproof.
Veracity Riflescope Reticles Veracity Riflescope Reticles help you overcome two of the biggest challenges when shooting long-distance: determining holdover at distance and hold-off for wind drift. This technology is based on the popular Burris Ballistic Plex® reticle that redefined trajectory compensation. This section will explain how to use the reticles found in Veracity Riflescopes. Front Focal Plane (FFP) All Veracity Riflescopes utilize a Front Focal Plane system.
Trajectory Compensation To better determine holdover and compensate for bullet drop, the patented Burris design incorporates hash marks on the lower vertical crosshair that are calibrated to provide dead-on aiming from 100 yards to 600 yards (200 – 700 yards for the Varmint reticle) for many of the most common hunting cartridges. Examples of the actual bullet path for many of the most popular cartridges are available for download on our website at www.burrisoptics.com.
Technical Tip For maximum accuracy at long ranges, instead of sighting in at 100 yards using the center of the reticle, sight in at a longer range such as 400 yards using the 400-yard ballistic line. This will decrease the amount of long-range error that can occur under various environmental conditions, or when slightly under estimating point-of-impact at shorter ranges. Shoot Responsibly Long-range shooting is extremely challenging and can be very rewarding.
Ballistic E1 FFP Reticle Front Focal Plane Reticle The Ballistic E1 FFP reticle is calculated in MOA (minute of angle) measurements. Trajectory compensation has been calculated out to 600 yards. Wind dots representing a 10 MPH wind adjustment are located at every hash mark below the vertical center point out to 500 yards. The bolder, tapered crosshairs make this reticle highly usable in the FFP design, ensuring that the reticle is still visible on low power.
Ballistic E1 FFP Varmint Reticle Front Focal Plane Reticle The Ballistic E1 FFP Varmint reticle is calculated in MOA (minute of angle) measurements. The Varmint reticle provides a very precise platform for measuring distance and determining target size by providing MOA tick marks across the horizontal crosshair and across the upper portion of the vertical crosshair.
Warranty This Veracity line of riflescopes is covered by the Burris Forever Warranty! Thank you for choosing Burris. You can be confident that the optic you purchased is built to the most exacting standards. You can count on Burris to perform every time you use it. We’re so confident in the craftsmanship of our products that we back them with a warranty that covers defects in the workmanship and materials. TO ACTIVATE YOUR WARRANTY, register your new product online at www.burrisoptics.com/warranty.
