Instruction Manual

Ballistic E1 FFP Reticle
Front Focal Plane Reticle
The Ballistic E1 FFP reticle is calculated in MOA
(minute of angle) measurements. Trajectory compen-
sation has been calculated out to 600 yards. Wind dots
representing a 10 MPH wind adjustment are located
at every hash mark below the vertical center point out
to 500 yards. The bolder, tapered crosshairs make this
reticle highly usable in the FFP design, ensuring that
the reticle is still visible on low power. The FFP also
allows the trajectory compensation technology to be
used at any magnification, a nice advantage over Rear
Focal Plane reticle designs that can only provide
trajectory compensation on high power.
Reticle Subtensions
Reticle Model Units ABCDEFGHI
Ballistic
2x-10x MOA 20 .75 .3 2442.3 .3
E1 MOA
Ballistic
3x-15x MOA 20 .5 .2 2442.3 .2
E1 MOA
9
A
B
H (dot diameter)
C
I
F
E
D
Yards
MOA
200
300
400
500
600
1.49
4.31
7.18
10.56
14.42
1.56
5.51
7.52
11.06
15.10
G
Trajec tory
Line Length
in MOA
1.5
3.0
5.0
7.0
Windage Dot
Center from
Vertical Center
in MOA
.75
1.5
2.4
3.3
Reticle Center = 100 yards
Inches @ 100 Yards