Instruction manual

Customer Service and Maintenance 12
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 121
12.3.6 Awning Light
Opening:
Press the housing gently together (Fig. 98)
and pull it out towards you.
Change the halogen bulb.
Hook at the upper edge of the housing must
engage with the recess of the holder.
Pres down housing.
Fig. 98 Awning light
12.4 Adjusting the Springs of
the Blind and the Insect
Screen
The tensile force of the spring for the blind or
the insect screen can be adjusted if necessary.
Two adjustment screws for the blind (Fig. 99,1)
and the insect screen (Fig. 99,2) are at the left
side of the window frame.
With a flat head screwdriver, turn the adjust-
ment screw in a clockwise direction to the
engagement position.
Check the tensile force of the spring.
If necessary, turn the adjustment screw in a
clockwise direction to the following engage-
ment position.
Fig. 99 Re-tensioning the spring tension
> The spring adjustment screw can-
not be turned back.