User's Manual

9-6 TSD B06720
Mobile telephone
To pair a telephone with the car, proceed as follows:
1. Activate the Bluetooth function on the mobile telephone and,
if necessary, activate the external SIM mode, which allows the
mobile telephone provision to access the mobile telephone’s
SIM card. Ensure that Bluetooth visibility is set to ‘SHOW
PHONE’ or ‘ON’ in order to allow automatic connection after
initial pairing. These settings may vary between models of
telephone, refer to your telephone manufacturer’s
instructions for details on how to perform this operation.
2. With the ignition switched on, press the button on the
multi-function steering wheel to display the telephone menu
in the driver instrument panel. Select the Phone search menu
option by pressing the thumbwheel to confirm the selection.
This search for devices may take several minutes.
3. A list of all available Bluetooth devices will be displayed on the
Infotainment touch screen. If Unknown number is displayed
in the list of devices on the Infotainment touch screen, this
indicates the system can find, but cannot identify a Bluetooth
telephone.
4. If applicable, activate ‘Wait for incoming Bluetooth
connections’ on the mobile telephone. Use the thumbwheel
to highlight and select the desired mobile telephone name.
The mobile telephone system will now prompt you to enter
a 16 digit security code into your mobile telephone. This
security code is shown on the driver information panel. Use
your telephone key pad to enter this number into your
telephone. The mobile telephone system only allows 30
seconds to enter this number. If the security code is entered
incorrectly the mobile telephone system will return to step 2
of the procedure.
5. If the SIM card setting requires the PIN code to be entered,
rotate the thumbwheel to change the digit in the right-hand
digit selection field. Press the thumbwheel to enter the
selected digit into the grey input line and select OK to confirm.
Dependant upon the type of mobile telephone used, the actual
digits entered may not be visible in the input line. Select if
you wish to delete the ‘*’ symbols in the input line. The
Save PIN menu can be activated if you wish to connect to
the mobile telephone system automatically without having to
enter the PIN code in future.
In the interests of data security, it is recommended that you
do not save the PIN code in the mobile telephone system.
Instead, you should re-enter the PIN code every time the
mobile telephone is automatically connected to the mobile
telephone system.
6. The prompt Create user profile? will appear on the driver
information panel. After pressing the thumbwheel to confirm,
the Bluetooth name of your mobile telephone will be
suggested as a user name. If you wish to enter a new user
name, use the thumbwheel to highlight and delete the
displayed name letter by letter. It is now possible to use the
thumbwheel to select characters and enter a new name. Select
OK to store the user profile under the displayed name.
After pairing has been successfully completed, the entries stored
in the mobile telephone’s phonebook will be automatically copied
into the memory of the mobile telephone system.
TSD B06720 Continental GT OHB EN-UK.book Page 6 Monday, November 22, 2010 5:26 PM