User's Manual

Operating guidelines

Incoming call

Active call

12a. Accepting, making, ending calls

In order to inform the driver of an incoming call, in the display a tele-

phone symbol is shown. At the same time the name and telephone

number of the caller (if available) will be shown. The audio system is

switched to mute and the ring tone is broadcast through the loudspea

ker of the audio system.

You can accept or reject the call using either the voice control (which

has to be activated beforehand, see chapter 22.5) or the touch

screen.

You will be asked whether you want to ‘accept’ or ‘reject’

the call.

The call can be accepted (pushing the

green symbol) or

rejected (pushing the

red symbol).

A call will be ended by pushing the red telephone symbol. During the

call, you have the possibility to regulate the volume of the voice of your

discussion partner through the `minus(-)´ or `plus(+)´ field.

Using this field, you access a submenu in which you are able

on the one hand to select and send DTMF tones (e.g. to check

your mailbox) and on the other to changeover into the private

mode. In this mode, your conversation will be completed via

mobile phone and is no longer audible to the other passengers in the

vehicle. In addition you have the possibility to mute the microphone,

e.g. for further inquiries with a passenger.

Note:

Please comply with the country-specific laws concerning

in-car telephone calls.

