BURY CP 1000 CarPhone Index Introductory information 1. General 2. Security guidelines Installation of the system 3. 4. 5. 6. 2 2 2 6 Scope of supply 6 Positioning and mounting 8 Plug the cable for the BURY CP 1000 CarPhone into the electronic box 11 Connections on the electronics box 12 Operating guidelines 7. Using the BURY CP 1000 CarPhone for the first time 8. Handling possibilities 9. Voice control 10. Operating the menu using the keypad 11. Menu navigation 12.
Introductory information 2 1. General Dear customer, Congratulations on purchasing the BURY CP 1000 CarPhone. You have chosen a high quality product that is extremely easy to use. Please read the operating manual carefully so that you can fully enjoy your BURY CP 1000 CarPhone. If you have any further questions concerning installation or operation of your car telephone, please contact your dealer. He will be happy to give you reliable advice. You can also contact our hotline.
XXAvoid contact with magnetic media XXTo avoid the risk of demagnetisation, do not allow electronic devices or magnetic media close to your phone for a long time XXAvoid Extreme Temperatures XXDo not expose your phone or its accessories to extreme temperatures, minimum – 10 and maximum + 55 degrees Celsius XXAvoid contact with liquid, keep dry XXDo not expose your phone or its accessories to liquid, moisture or high humidity XXDo not use harsh chemicals, cleaning solvents, or aerosols to clean the devic
Introductory information RF Exposure Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. To ensure compliance with RF exposure guidelines the phone must be used with a minimum of 30 cm separation from the body. Specific Absorption Rate (SAR) Your device is a radio transmitter and receiver.
Intended use We shall not be liable for damages or malfunctions due to improper use of the BURY CP 1000 CarPhone. Therefore, do not expose the device to moisture, extreme temperatures or shocks and carefully follow the procedure described in the installation and operating guidelines. Use while driving Operate the system only when the situation allows it and when you do not endanger, harm, constrain, or annoy other road users.
Installation of the system 3.
The BURY CP 1000 CarPhone is supplied with different combinations of components, depending on the sales regions (countries). The operating manual refers to all versions.
Installation of the system 4. Positioning and mounting Step 1: First of all, please choose the most convenient position for the BURY CP 1000 CarPhone in your vehicle by checking different positions in the vehicle. When installing the BURY CP 1000 CarPhone avoid positioning the system where it may disrupt the proper operation of the vehicle and its components, such as car stereo, air bags, cubbyhole, glove compartment, ashtray, lighter, gear stick or hand brake.
Example of installation in the car: Overview of all components: You will receive a separate manual when you purchase the handset shown.
Installation of the system Step 2: Depending on the vehicle type and its equipment (e.g. airbags), it is reasonable to install the microphone either at the A-pillar, at the sun shield or at the roof interior. For details about the equipment features please refer to the vehicle documents. Step 3: Remove or loosen up cladding and covers to be able to install all of the cables in the vehicle as comfortably as possible.
5.
Installation of the system 12 6. Connections on the electronics box The additional components of the BURY CP 1000 CarPhone are connected to the electronics box. The following connections are provided: Connection options: 1 Power supply 2 External loudspeaker 3 Microphone 4 BURY CP 1000 CarPhone 4 1 2 1 - Power supply The power supply of the BURY CP 1000 CarPhone is established via a 4-core cable.
Installation instructions for the fuses Please cut through the red, the black and the blue cable by means of a wire cutter. Now insert the two endings of the red cable resulting from the cut into one of the binders, then close it. If you hear two clicking noises, the clamp snapped in properly. Now insert one of the fuses and then repeat the procedure with the other cables.
Installation of the system 4 - BURY CP 1000 CarPhone This is where you connect the BURY CP 1000 CarPhone. SIM card protection The plastic cap that is used to protect your SIM card can be used once only. Note: XXThe device may be damaged if you try to remove the plastic cap. Optionally, you can also protect your SIM card with a removable rubber cap.
Operating guidelines 15 7. Using the BURY CP 1000 CarPhone for the first time The BURY CP 1000 CarPhone offers you an extremely convenient in-car telephone solution. A well as a 2.8 inch display and a well-spaced keypad, the clear and easy-to-read car phone also has SIM card slot which allows it to function as a fully stand-alone communication system.
Operating guidelines Adjusting the volume Use the volume control to adjust the ring volume when no calls are active. Use the volume control to adjust the call volume during a call. Entering your PIN Now enter your PIN. Your PIN (Personal Identification Number) protects you against unauthorised use of your telephone card by third parties. Note: XXIf you enter the wrong PIN three times you will need your PUK number to unlock your card. Afterwards you will reach the head menu.
8. Handling possibilities The system can be operated in two ways: 1. Operation using voice control The „VOICE COMMANDS“ are highlighted in the further explanatory notes. 2. Operating the menu using the keypad 9. Voice control The menu items of the system can be selected using voice commands once this function has been activated. There are exceptions, however, when you still have to use navigation key scroll. During an active telephone call, for instance, you can’t use voice commands.
Operating guidelines 18 In addition to these commands, the BURY CP 1000 CarPhone recognises the numbers from zero to nine. Numbers which are larger than nine must be spoken individually (e.g. 10 = one, zero). To search in the contacts, the BURY CP 1000 CarPhone recognises the letters „A“ to „Z“ as well as the NATO alphabet. For the entry of telephone numbers abroad, the command „PLUS“ is also available.
11. Menu navigation Here you will find all menus which are necessary for the operation and configuration of the system. These can be selected through the keyboard or using voice control. You are also able to select additional frequently used commands via voice control which otherwise first appear later in the menu tree. These are as follows: „DIAL JOE BLOGGS“, „READ NEW TEXT MESSAGE“.
Operating guidelines 20 Dial number It makes sense to divide telephone numbers in short number blocks of 3-4 digits and to say them this way. At each break, the BURY CP 1000 CarPhone repeats the number block and waits for the next number block. After the signal tone you can respectively continue your announcement. Dial number Enter the area code. Enter the first numbers of the actual telephone number. Enter the remaining numbers of the actual telephone number.
is a placeholder for an entry from your contacts. If you select a name, you go directly to the respective entry. Here you can search for entries through a letter field. Read out the first letters of the first name and surname (depending on the sort sequence) which you want to find. The corresponding letter appears in the top line and will also be read out to you again.
Operating guidelines Redial The number which was last selected can be selected once again. Call lists Here in a chronologic sequence all calls are listed which have been made, missed or accepted. The name of the caller / the person being called and the telephone number are displayed. If it is not possible to allocate a contact to the telephone number, the number alone appears without additional information. You can have the telephone number read to you and if you want call back.
Settings In this menu point, you can configure the BURY CP 1000 CarPhone through four further submenus. These are Voice dial, Audio, Display and Phone. Voice dial In this submenu you can carry out the following settings: Activation or deactivation of the magic word: If you activate this function you can start the voice controlled operation of the BURY CP 1000 CarPhone straight from the main menu with the preset voice command „ACTIVATE VOICE DIAL“.
Operating guidelines Audio In this area you have the possibility to change the audio settings of the BURY CP 1000 CarPhone. The BURY CP 1000 CarPhone is sold with four Ringtones from which you can respectively select one. With „NEXT“ or „PREVIOUS“ you can navigate in the list. With „SELECT“ the ring tone is selected. The volume level for the voice feedback and the selected ring tone can be set in an additional sub menu.
Phone In the phone menu item, you can make the settings concerning the answering of calls, the menu languages, the PIN code, the number presentation, the GSM, the settings of date and time, for the system itself, and for the willingness to answer calls. With the call answering function you can specify as to whether you want to answer an incoming call manually via the keypad, by voice command, or automatically.
Operating guidelines The phone list for the FDN function can be reviewed and activated / deactivated by using the PIN 2 code. The number of FDN contacts you can store to the SIM memory depends on the SIM card (at least 9 and up to 50 contacts). You can then assign the numbers 0-9 to the defined phone numbers and you can call the contact simply by pressing the corresponding number. Note: XXIf the FDN mode is activated, you can only send an SMS to a number that is stored in the FDN contacts.
Data/Czas Tutaj można ustawić datę i godzinę. Możesz wybierać pomiędzy różnymi formatami. Under the System heading, you receive information about the software and hardware installed in the BURY CP 1000 CarPhone under Version info. If a new item of firmware should become available for the BURY CP 1000 CarPhone, then under the menu item Software update and using the BURY Update Suite, you are able to update the system. Note: XXDo not interrupt the power supply of the BURY CP 1000 CarPhone during an update.
Operating guidelines 28 Memo If you want to make a note of something important either after or during a trip or maybe during a telephone call, it is often the case that you don’t have anything to write with at hand or the traffic situation prevents you from doing so. With this function you are able to save information that is important to you without posing a risk to yourself or others. A voice memo can be saved directly from the main menu or during a telephone call.
General voice memos are especially suited to vehicles which have continually alternating drivers, e.g. delivery vehicles. This means that the next driver can be instructed accordingly if someone forgot to refuel or the vehicle has a flat tyre, preventing it from being driven. 12. Accepting, making, ending calls You will be alerted of an incoming call via the voice output and the ring tone. Your vehicle‘s sound system will switch onto mute.
Further Information 13. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: Administration: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 D-32584 Löhne GERMANY Producer: BURY Spółka z o.o. ul. Wojska Polskiego 4 39-300 MIELEC POLAND Hotline: +49(0)180 6 - 842 468* * 0.20 €/min. Deutsche Telekom AG landline.
14. Approvals and declaration of conformity At BURY, purchase, production, as well as distribution and service, follow environmentally friendly processes according to the ISO 14001 Standard and Quality Management Requirements, according to the ISO/TS 16949 Standard.
EXPRESS WARRANTY AGAINST DEFECTS – AUSTRALIA EFFECTIVE 1 st JANUARY, 2012 This product if imported by Point to Point Technology Pty Ltd is warranted in Australia to be free from any defect in material and workmanship, subject to the following terms and conditions. Who provides this warranty: POINT TO POINT TECHNOLOGY PTY LTD 2/2 KEYSBOROUGH CLOSE, KEYSBOROUGH VIC 3173 TOLL FREE: 1300 550 720 EMAIL: service@ptp.net.
