Operating instructions

Operating guidelines

If a call is received by both mobile phones at the same time, preference

is given to the primary mobile phone. You will be displayed the inco-

ming call on the other mobile after accepting or declining the first call.

You are then able to end the first call at short notice and to also decline

the second call, or to end the first call and to accept the second call

directly. Holding the first call isn’t possible, as the calls are not being

made on the same telephone number. The conference mode which is

described in the instructions below is not possible between the two

mobile phones.

If two or more mobile phone signatures are saved and the Multipoint

function is activated, then the mobile phones will be sought and con-

nected in the order in which they are listed in the telephones list – po-

sition 1 and position 2. In addition to the first telephone that is con-

nected, you will then also be shown the second telephone in the main

menu.

If a number of signatures from different mobile phones have been sa-

ved (from several different drivers) it may be the case that their order

does not suit your requirements. To be able to define both telephones

and their order for the multipoint function, you can set one mobile

phone as standard (as telephone 1) and another mobile phone as tele-

phone 2. If you do not set the second telephone then the HFCK will

complete a full search of the telephones list twice over. If the HFCK

does not find a second active telephone (because the Bluetooth® func-

tion has not been activated, for instance), you must either connect the

second telephone manually via the telephone list, or deactivate the

multipoint function and then activate it again.

Via the „SWITCH PHONES“ command in the main menu, you are

able to swap the priorities of the mobile telephones.

Voice dial

In this submenu you can carry out the following settings:

Activation or deactivation of the magic word:

If you activate this function you can start the voice controlled operation

of the HFCK straight from the main menu with the pre-set voice com-

mand „ACTIVATE VOICE DIAL“. With this function, you are able to

leave both your hands on the wheel. To indicate that you are able to

activate the HFCK using the magic word, an exclamation mark appears

in the voice control symbol.

Voice dial

Switch phones

Activate voice dial