BURY EasyTouch Index Introductory information 1. General 2. Security guidelines 2 2 3 Installation of the system 6 3. Scope of supply 4. Instructions on battery 5. Positioning and mounting 6 8 9 First steps 6. Using the hands-free car kit for the first time 7. Establishing a Bluetooth connection Operating guidelines 8. Accepting, making, ending calls 9. Other operating options Further Information 10. Service 11. Appropriate use of this system 12.
Introductory information 2 1. General Dear customer, Congratulations on purchasing a BURY hands-free car kit. You have chosen a high quality product that is extremely easy to use. Please read the operating manual carefully so that you can fully enjoy your BURY hands-free car kit. If you have any further questions concerning installation or operation of your car kit, please contact your dealer. He will be happy to give you reliable advice. You can also contact our hotline.
2. Security guidelines Installation - who and where The installation of this system can be carried out by yourself but please observe any installation requirements issued by the automotive manufacturer. During the installation, park the car at a place where the road traffic is not impaired. Power supply This hands-free car kit is designed for use in vehicles independent of the available power supply, whether 12 or 24 volts.
Introductory information Position, volume Install the components of the device in the vehicle so that your field of vision is not impaired and the components are not mounted in the impact zone of the passenger compartment or in the airbag inflation zones. Intended use We shall not be liable for damages or malfunctions due to improper use of the hands-free system.
Important: XXThe driver is ultimately responsible for the safe operation and control of their vehicle at all times. You should never use a hand held phone, including sending or reading text or picture messages, while driving. XXResearch indicates that there is a risk to safety when the driver of a motor vehicle is distracted and using a mobile phone while driving can be a distraction. XXThe manufacturer strongly recommends that you use a hands-free solution for making telephone calls whilst driving.
Installation of the system 3.
The hands-free car kit (HFCK) is supplied with various components depending on the sales region. However, the operating instructions apply to all variants. Description of the components: 1) Hands-free car kit 2) Sun visor clip 3) Mini USB / USB cable 4) 12V/24V Cigarette lighter plug 5) Detailed operating instructions are available in the internet 6) Printed quick user guide Note: XXIf certain components are added or omitted you will receive the corresponding information on a separate enclosure.
Installation of the system 4. Instructions on battery The hands-free car kit (HFCK) has an integrated rechargeable battery which remains activated for approx. 350 hours when fully loaded. The battery guarantees up to 7 hours of hands-free talking without the need for recharging. These values may differ depending on the settings and the use of the hands-free car kit.
5. Positioning and mounting Mounting on the sun visor Depending on how you would like to attach the HFCK to the sun visor in the vehicle, you must slide the sun visor clip onto the locking device on either side. Press the fastener on the locking device to completely slide in the sun visor clip. The clip snaps into place with a click sound, as long as it has been correctly slid into place. Variant A: Push the sun visor clip upwards and away from you onto the sun visor.
Installation of the system Variant B: Push the sun visor clip downwards and towards you onto the sun visor. Pulling out the microphone Now pull out the integrated microphone from the hands-free car kit for optimal speech input.
Opening and shutting the sun visor Note: XXFlipping down the sun visor does not effect the function of the HFCK. XXThe sun visor can sometimes not be fully opened. Depending on the type / thickness of the sun visor, you should try both installation types once. Check whether the system can be used comfortably and that it does not restrict your view of the road. To disconnect the clip from the locking device, press down the fastener and then remove the clip.
First steps Power supply Connect the BURY EasyTouch via the USB cable to the cigarette lighter plug and plug this into the corresponding connection inside the car. Charging the BURY EasyTouch battery Option 1: Charge the BURY EasyTouch battery via the USB cable and the cigarette lighter plug inside the car. Option 2: Charge the BURY EasyTouch battery via the USB cable on your PC / laptop. 6. Using the hands-free car kit for the first time Turn on the device using the on-off button on the right side.
7. Establishing a Bluetooth connection If you wish to establish a Bluetooth connection between your mobile and the HFCK for the first time, you have to activate the Bluetooth function of your mobile phone and search for Bluetooth devices. In this case, search for a device labelled „BURY EasyTouch“.If several devices were identified, please select the HFCK and enter the PIN number „1234“. The Bluetooth connection (pairing) will then be established between your mobile phone and the HFCK.
First steps If you wish to cancel a Bluetooth connection, you can either disconnect it conveniently at the HFCK or at your mobile phone. In addition, the connection is disconnected, if you move too far away from the vehicle while taking your mobile phone with you and thus leave the reception radius of the HFCK. If you return to your vehicle within 15 minutes, your telephone will be automatically reconnected to BURY EasyTouch.
Operating guidelines 8. Accepting, making, ending calls The BURY EasyTouch is operated using the key buttons on the device. The function of the buttons can vary according to the menu item. Note: XXPlease comply with the country-specific laws concerning in-car telephone calls. Making calls Press the call button. The device says: Enter voicetag. Give your voicetag loud and clearly.
Operating guidelines Option 1: Creating and using voicetags To make a phone call you must set voicetags on your mobile phone. You can only set voicetags on your mobile phone for contacts already saved in your address book (not on your SIM card!). Please note: XXCopy your contacts from your SIM card into your telephone address book. Then only use contacts from your address book. When you call up a contact from your address book, choose under Options „Add call name“.
Option 3: Using your smartphone‘s voice dialling function Most smartphones have a voice dialling function which you can activate using BURY EasyTouch. You can then use your smartphone‘s voice dialling function via BURY EasyTouch. Please make sure that you repeat the smartphone‘s precise voicetag which you can find in the your smartphone‘s operating instructions. Using the voicetag, in addition to making calls you can also play music via BURY EasyTouch.
Operating guidelines Outgoing call Briefly press down on the call button to activate the voicetag function. The device says: Enter voicetag. Begin the call with a voicetag. If the number dialled is busy, you can begin to redial. To do so, hold down the call button (for two seconds). The device says: Redial. If you announce a non-saved voicetag then the device says: Voicetag is not available. BURY EasyTouch returns to standby mode.
Setting the volume Press down the vertical buttons to gradually increase (top buttons) or decrease the sound (lower buttons) the sound during an active conversation. A high signal tone sounds when the maximum volume has been reached. A low signal tone sounds when the minimum volume has been reached. But you can also go over the buttons with your fingers (both directions). 9. Other operating options Connecting a telephone At least one telephone is listed in the BURY EasyTouch telephone list.
Operating guidelines While already linked phones are searched for by BURY EasyTouch, you cannot link and connect any other telephone yourself. To link and connect another mobile phone, briefly press down the end call button to interrupt the automatic connection. Hold down (for five seconds) the end call button to reload the factory settings. The device then switches off. Press down on the call button to start the automatic connection.
Voice messages in standby mode The following voice messages are only played back in standby mode but not during a call or during active functions. The volume is the same as during an active telephone call.
Further Information 10. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: Administration: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 D-32584 Löhne GERMANY Producer: BURY Spółka z o.o. ul. Wojska Polskiego 4 39-300 Mielec POLAND Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min.
BURY GmbH & Co. KG Im Hause DPD Depot 103 Robinienweg D-03222 Lübbenau GERMANY Information on the disposal of electrical goods in the EU The crossed out wheelie bin symbol means that electrical and electronic products, batteries and accumulators must be disposed of separately in the European Union. Please do not dispose of any such products in your normal household waste.
Further Information 24 12. Approvals and declaration of conformity Purchase and production as well as service and sales at BURY are subject to tough quality and environmental management conditions according to ISO 9001 and ISO 14001.
