BURY EasyTouch Pro Index Introductory information 1. General 2. Security guidelines 2 2 3 Installation of the system 6 3. Scope of supply 4. Instructions on battery 5. Positioning and mounting 6 8 9 First steps 6. Using the hands-free car kit for the first time Operating guidelines 7. Establishing a Bluetooth connection 8. Operating with the touch screen 9. Menu navigation 10. Accepting, making, ending calls 11. Other operating options Further Information 12. Service 13.
Introductory information 2 1. General Dear customer, Congratulations on purchasing a BURY hands-free car kit. You have chosen a high quality product that is extremely easy to use. Please read the operating manual carefully so that you can fully enjoy your BURY hands-free car kit. If you have any further questions concerning installation or operation of your car kit, please contact your dealer. He will be happy to give you reliable advice. You can also contact our hotline.
2. Security guidelines Installation - who and where The installation of this system can be carried out by yourself but please observe any installation requirements issued by the automotive manufacturer. During the installation, park the car at a place where the road traffic is not impaired. Power supply This hands-free car kit is designed for use in vehicles independent of the available power supply, whether 12 or 24 volts.
Introductory information Position, volume Install the components of the device in the vehicle so that your field of vision is not impaired and the components are not mounted in the impact zone of the passenger compartment or in the airbag inflation zones. Intended use We shall not be liable for damages or malfunctions due to improper use of the hands-free system.
This device may produce a loud sound Maximum voice loudness in the device is not restricted. This may causes some echo. Adjust the volume and decrease the loudness in device if it is necessary. Find the balance between quality and loudness. Important: XXThe driver is ultimately responsible for the safe operation and control of their vehicle at all times. You should never use a hand held phone, including sending or reading text or picture messages, while driving.
Installation of the system 3. Scope of supply BURY EasyTouch KURZANLEITUNG QUICK USER GUIDE STRUČNŶ NÁVOD OVERSIGTSVEJLEDNING PIKAOPPAAN KRÓTKA INSTRUKCJA RU КРАТКАЯ ИНСТРУКЦИЯ ÖVERSIKTSINSTRUKTION Sehr geehrte Kundin, sehr geehrter Kunde, Arvoisa Asiakas, Sie haben eine Freisprecheinrichtung der Marke BURY erworben und sich so für ein Produkt mit hoher Qualität sowie höchstem Bedienungskomfort entschieden.
The hands-free car kit (HFCK) is supplied with various components depending on the sales region. However, the operating instructions apply to all variants. Description of the components: 1) Hands-free car kit 2) Sun visor clip 3) Mini USB / USB cable 4) 12V/24V Cigarette lighter plug 5) Detailed operating instructions are available in the internet 6) Printed quick user guide Note: XXIf certain components are added or omitted you will receive the corresponding information on a separate enclosure.
Installation of the system 4. Instructions on battery The hands-free car kit (HFCK) has an integrated rechargeable battery which remains activated for approx. 350 hours when fully loaded. The battery guarantees up to 7 hours of hands-free talking without the need for recharging. These values may differ depending on the settings and the use of the hands-free car kit.
5. Positioning and mounting Mounting on the sun visor Depending on how you would like to attach the HFCK to the sun visor in the vehicle, you must slide the sun visor clip onto the locking device on either side. Press the fastener on the locking device to completely slide in the sun visor clip. The clip snaps into place with a click sound, as long as it has been correctly slid into place. Variant A: Push the sun visor clip upwards and away from you onto the sun visor.
Installation of the system Variant B: Push the sun visor clip downwards and towards you onto the sun visor. Pulling out the microphone Now pull out the integrated microphone from the hands-free car kit for optimal speech input.
Opening and shutting the sun visor Note: XXFlipping down the sun visor does not effect the function of the HFCK. XXThe sun visor can sometimes not be fully opened. Depending on the type / thickness of the sun visor, you should try both installation types once. Check whether the system can be used comfortably and that it does not restrict your view of the road. To disconnect the clip from the locking device, press down the fastener and then remove the clip.
First steps Power supply Connect the BURY EasyTouch Pro via the USB cable to the cigarette lighter plug and plug this into the corresponding connection inside the car. Charging the BURY EasyTouch Pro battery Option 1: Charge the BURY EasyTouch Pro battery via the USB cable and the cigarette lighter plug inside the car. Option 2: Charge the BURY EasyTouch Pro battery via the USB cable on your PC / laptop. 6.
Then you come to the main menu. In the top line, some symbols may appear both before and after a telephone has been connected.
Operating guidelines 7. Establishing a Bluetooth connection first time, you have to activate the Bluetooth function of your mobile phone and search for Bluetooth devices. In this case, search for a device labelled „BURY EasyTouch Pro“.If several devices were identified, please select the HFCK and enter the PIN number „1234“. The Bluetooth connection (pairing) will then be established between your mobile phone and the HFCK.
If you wish to cancel a Bluetooth connection, you can either disconnect it conveniently at the HFCK or at your mobile phone. In addition, the connection is disconnected, if you move too far away from the vehicle while taking your mobile phone with you and thus leave the reception radius of the HFCK. If you return to your vehicle within 15 minutes, your telephone will be automatically reconnected to BURY EasyTouch Pro.
Operating guidelines 16 8. Operating with the touch screen Navigation is done using different buttons. With the end button you can cancel actions or go back one step. When you press and hold the home button you will go directly back to the main menu. Actions are confirmed or executed with the call button. Use the vertical buttons to navigate within the menus. End button Menu Call button Vertical buttons Home button If you operate the system with the touch screen then it gets dirty over time.
9. Menu navigation Operating the BURY EasyTouch Pro is done using the touch keys on the device. The function of the keys can differ for each menu item. To open the menu, press the home button. To navigate within the menus use the vertical buttons. The selected menu item will then be highlighted in blue. To select this menu item press the call button. To close this menu press the end button. Note: XXPlease take note of the country-specific legislation regarding making phone calls whilst driving.
Operating guidelines If your contacts are saved in the phone memory then, depending on the mobile phone type, four or more phone numbers can be allocated to a single contact. The terms for these are not standardised and can have different names depending on the phone manufacturer, or can be specified by you*: „PRIVATE“, „MobilE“, „WORK“, „GENERAL“. * This function is dependent on the phone. Some mobiles do not support these categories at all or only support them partially.
Call lists All calls which have been made, received and missed are listed here in chronological order. The callers name / the name of the person called and the respective phone number are displayed. If the phone number cannot be allocated to a contact from the phone book then the number appears on its own, with no further information. You can navigate the lists in the same way you navigate the phone book. Synchronisation You can Load the phone book in this menu.
Operating guidelines 20 Settings In this menu you can configure the HFCK with other submenus. These are Switch phones, Automatic connection, Sleep mode, Language, Multipoint, TTS, Key sound, Brightness, Factory settings, Version info. With the Switch phones function, you can change the priorities of both connected telephones. Both mobile phones are disconnected and are then connected again the other way round. This can take a few seconds. Press the home button once to activate the BURY EasyTouch Pro.
In order to avoid glare when driving at night, Sleep mode can be activated. In sleep mode, the display will turn off after either 15, 30, 60 or 90 seconds. Press the home button to return to active mode. When a call is incoming, the HFCK activates the display automatically. You can select the Menu language upon commissioning, following software updates or after loading the factory settings.
Operating guidelines If both mobile phones happen to receive a call at the same time then the primary phone will get priority. The incoming call on the other mobile will be displayed to you after the first call has been answered or rejected. Then the first call can be ended quickly and then the second can also be rejected (both of these steps are taken by pressing the end button) or the first call can be ended and the second call answered (by pressing the call button).
In the Brightness menu, the intensity of the light diodes in the display can be changed. Use the vertical buttons for this. If you have changed settings and the HFCK is not working as desired then you can return the HFCK to factory settings with the Factory settings function. Under Version info, you can see information on the software and hardware installed on the HFCK. You can find all up-to-date software updates on our website www.bury.com.
Operating guidelines 10. Accepting, making, ending calls The BURY EasyTouch Pro is operated using the key buttons on the device. The function of the buttons can vary according to the menu item. Note: XXPlease comply with the country-specific laws concerning in-car telephone calls. Making calls Press the call button. The device says: Enter voicetag. Give your voicetag loud and clearly.
Option 1: Creating and using voicetags To make a phone call you must set voicetags on your mobile phone. You can only set voicetags on your mobile phone for contacts already saved in your address book (not on your SIM card!). Please note: XXCopy your contacts from your SIM card into your telephone address book. Then only use contacts from your address book. When you call up a contact from your address book, choose under Options „Add call name“.
Operating guidelines Option 3: Using your smartphone‘s voice dialling function Most smartphones have a voice dialling function which you can activate using BURY EasyTouch Pro. You can then use your smartphone‘s voice dialling function via BURY EasyTouch Pro. Please make sure that you repeat the smartphone‘s precise voicetag which you can find in the your smartphone‘s operating instructions. Using the voicetag, in addition to making calls you can also play music via BURY EasyTouch Pro.
Outgoing call Briefly press down on the call button to activate the voicetag function. The device says: Enter voicetag. Begin the call with a voicetag. If the number dialled is busy, you can begin to redial. To do so, hold down the call button (for two seconds). The device says: Redial. If you announce a non-saved voicetag then the device says: Voicetag is not available. BURY EasyTouch Pro returns to standby mode.
Operating guidelines Setting the volume Press down the vertical buttons to gradually increase (top buttons) or decrease the sound (lower buttons) the sound during an active conversation. A high signal tone sounds when the maximum volume has been reached. A low signal tone sounds when the minimum volume has been reached. But you can also go over the buttons with your fingers (both directions). 11.
While already linked phones are searched for by BURY EasyTouch Pro, you cannot link and connect any other telephone yourself. To link and connect another mobile phone, briefly press down the end call button to interrupt the automatic connection. Disconnecting a telephone Hold down (for three seconds) the end call button to disconnect the telephone. The device says: No telephone is connected.
Operating guidelines Voice messages in standby mode The following voice messages are only played back in standby mode but not during a call or during active functions. The volume is the same as during an active telephone call.
Further Information 31 12. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: Administration: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 D-32584 Löhne GERMANY Producer: BURY Spółka z o.o. ul. Wojska Polskiego 4 39-300 Mielec POLAND Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min.
Further Information BURY GmbH & Co. KG Im Hause DPD Depot 103 Robinienweg D-03222 Lübbenau GERMANY Specific explanations regarding the assertion of claims based on defects of the product (warranty / guarantee / service) for certain countries can be found at the end of these instructions.
14. Approvals and declaration of conformity At BURY, purchase, production, as well as distribution and service, follow environmentally friendly processes according to the ISO 14001 Standard and Quality Management Requirements, according to the ISO/TS 16949 Standard.
Further Information EXPRESS WARRANTY AGAINST DEFECTS – AUSTRALIA EFFECTIVE 1st JANUARY, 2012 This product if imported by Point to Point Technology Pty Ltd is warranted in Australia to be free from any defect in material and workmanship, subject to the following terms and conditions. Who provides this warranty: POINT TO POINT TECHNOLOGY PTY LTD 2/2 KEYSBOROUGH CLOSE, KEYSBOROUGH VIC 3173 TOLL FREE: 1300 550 720 EMAIL: service@ptp.net.
Warranty Exclusions Failure to provide a proof of purchase will result in your warranty claim being rejected. Product failure due to customer misuse, abuse or abnormal use. Failure by the customer to take reasonable care. Failure due to not using the product in accordance with instructions stated in the manufactures user guide. Product failure due to recommended installation procedures not being followed as stated in the manufacturer’s user guide.manufacturer’s user guide.
