BURY Motion Universal Index Introductory information 1. General 2. Security guidelines Installation of the hands-free car kit 3. Scope of supply 4. Installation of the system 5. Positioning and mounting 6. Installing the BURY Motion Universal in your vehicle 7. Inserting and removing the mobile phone Operating guidelines 8. Rotating the BURY Motion Universal 9. Using the hands-free car kit for the first time 10. Establishing a Bluetooth connection 11. Action button features 12.
Introductory information 2 1. General Dear customer, Congratulations on purchasing a BURY hands-free car kit. You have chosen a high quality product that is extremely easy to use. Please read the operating manual carefully so that you can fully enjoy your BURY hands-free car kit. If you have any further questions concerning installation or operation of your car kit, please contact your dealer. He will be happy to give you reliable advice. You can also contact our hotline.
Intended use We shall not be liable for damages or malfunctions due to improper use of the hands-free system. Therefore, do not expose the device to moisture, extreme temperatures or shocks and carefully follow the procedure described in the installation and operating guidelines. Use while driving Operate the system only when the situation allows it and when you do not endanger, harm, constrain, or annoy other road users.
Installation of the hands-free car kit 3.
The hands-free car kit (HFCK) is supplied with different combinations of components, depending on the sales regions (countries). The operating manual refers to all versions.
Installation of the hands-free car kit 4. Installation of the system Important: XXWhen positioning the device please take care that it does not impair the view onto the road, will not be installed in the impact zone of the passenger compartment (amongst others in the airbag inflation zones) and that the cable may be laid without any problems. XXPlease avoid direct sunlight on the device or high internal temperatures, which can be rapidly reached in parked vehicles.
Step 2: Adapting the BURY Motion Universal to the size of the mobile phone. Important: XXBefore you begin to adjust the BMU to fit your particular mobile phone, it is important that you set the device to the closed position. This can be done by pushing the top of it until the locking button on the right side pops out with an audible “click”. To be able to adapt the device to the size of the mobile phone lift all of the adjustment locks by pressing the release buttons 1, 2, 3 until they click.
Installation of the hands-free car kit Insert the mobile phone into the BURY Motion Universal. Firstly, adjust the lower width of the BMU to the width of the mobile phone and press button 1 in order to block the set position. Next adjust the height and the upper width of the device to the height and width of the phone and press in keys 2 and 3 in order to block the set positions. Please note: XXIt is possible to set all positons of the BMU at the same time by lightly pressing button 1, 2 and 3.
Step 3: Adjusting the corner fastener. 4 3 1 2 Adjust the corner fastener to the thickness of the phone – increase the depth by turning it in a clockwise direction, tighten it by turning it anticlockwise. 5. Positioning and mounting First of all, please choose the most convenient position for the BURY Motion Universal in your vehicle by checking different positions in the vehicle. In the following chapters, the Window Mount serves as an installation example.
Installation of the hands-free car kit 6. Installing the BURY Motion Universal in your vehicle Step 1: Connecting the BURY Motion Universal with the Window Mount Push the BURY Motion Universal in the Window Mount until you can feel it click into place. After this, attach the Window Mount with the BURY Motion Universal in the vehicle. Note: XXYou will find the same snap-in mechanism on the Window Mount as you do on the Dash Mount Adapter.
With the help of a suction pad you can attach the BURY Motion Universal to the windscreen. To do this, use the press-stud on the Window Mount in order to either increase or decrease the pressure on the suction pad. To do this, use the press-stud on the Window Mount in order to either increase or decrease the pressure on the suction pad. If you press down on the press stud from top to bottom then the suction pad attachment loosens again.
Installation of the hands-free car kit 7. Inserting and removing the mobile phone Insert the smartphone in the BURY Motion Universal. Before you insert the smartphone in the BMU, release the holding mechanism by pressing the locking button in. The locking button is situated on the right hand side of the device. If necessary, remove the protective cover from your smartphone. Place the smartphone in the BMU from above.
Removing the smartphone from the BURY Motion Universal. To release the locking mechanism press the button on the right hand side of the device. Now remove the smartphone by lifting it out of the BMU.
Operating guidelines 8. Rotating the BURY Motion Universal You can turn the smartphone by 180 degrees (90 degrees to the left or right accordingly) together with the BMU. Rotate your device to best suite the application you are using. Used in the landscape (horizontal) format, most smartphones will adjust the text size and websites images automatically making them easier to read.
10. Establishing a Bluetooth connection If you wish to establish a Bluetooth connection between your mobile and the HFCK for the first time, you have to activate the Bluetooth function of your mobile phone and search for Bluetooth devices. In this case, search for a device labelled „BMU…“. If several devices were identified, please select the BMU and enter the PIN number „1234“. The Bluetooth connection (pairing) will then be established between your mobile phone and the HFCK.
Operating guidelines these steps are taken by pressing the end button) or the first call can be ended and the second call answered (by pressing the call button). It is not possible to put the first caller on hold because both callers did not phone the same number. Should another phone ring during the call then the incoming call can be rejected by pressing the end button on the phone.
Operating guidelines 17 Functional Action Button 12. Playing back music from your smartphone You can play back music files saved on your iPhone via the BURY Motion Universal, thanks to the integrated amplifier (class D) and the speaker. Sound can be transmitted in stereo quality through the AUX OUT output. Thanks to the high resolution of the multi-touch screen, listening to music with the iPhone isn‘t just an acoustic experience, it‘s also a visual experience.
Further information 14. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: Administration: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 D-32584 Löhne Germany Producer: BURY Spółka z o.o. ul. Wojska Polskiego 4 39-300 Mielec Poland Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min.
15. Appropriate use of this system This hands-free car kit is only intended for use with Bluetooth mobile telephones and music playback systems in motor vehicles. When using this system, please comply with the regulations and laws specific to the country in which you are driving and the instructions provided in the guidebook for the mobile telephone that you are using. 16.