User's Manual

TRIP 113
Deleting an existing key assignment
You can delete an existing key assignment once
more.
1. Press the e button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET TRIP" if applicable (if your vehicle
is equipped with the Sport Chrono Package
Plus).
4. Select "
SET logbook"
> "
Manage lists".
5. Select the "
Driver" list.
6. Select the desired driver.
7. Select "
Delete key".
8. Confirm the message by selecting "
Yes".
The assignment is deleted again.
Transferring the logbook data
Depending on the equipment in your PCM, you can
either transfer the stored data via the Bluetooth
®
interface or the USB interface. The data is not
deleted during this process.
 Please note that the radio connection
between the two devices must be activated
for data transfer using Bluetooth
®
. To find out
how to activate this radio connection, please
refer to the section "Switching Bluetooth on"
on page 51.
You will only be able to access the "to USB"
transfer method if there is a USB memory
stick connected to the USB interface. To find
out more about the permissible USB memory
media, please refer to the section "Notes on
the media supported" on page 42.
1. Press the e button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select
"Logbook"
> "
Transfer data".
Transferring data via the USB interface
4. Select "
to USB".
The data is transferred provided there is a
storage medium without write protection and
with sufficient free memory connected.
Otherwise you are notified of the problem with
the data transfer by means of an error
message.
Transferring data via the Bluetooth interface
4. Select "
to Bluetooth".
A list of the Bluetooth devices currently
authorized is opened.
5. The list of known devices that are suitable for
a transfer is displayed. If the desired device is
not there, you can search for further devices.
To do this, press "
New device" (see also the
section "Adding a new Bluetooth device" on
page 61).
6. Select the desired device in the list.
The data is transferred.