User's Manual

NAVI 131
Sending a destination via the
Bluetooth
®
interface
 Please note that the radio connection
between the two devices must be activated
for data transfer using Bluetooth
®
. To find out
how to activate this radio connection, please
refer to the section "Switching Bluetooth on"
on page 51.
You will only be able to access the "
to USB"
transfer method if there is a USB memory
stick connected to the USB interface. To find
out more about the permissible USB memory
media, please refer to the section "Notes on
the media supported" on page 42.
5. Select "
to Bluetooth".
6. The list of known devices that are suitable for
a transfer is displayed. If the desired device is
not there, you can search for further devices.
To do this, press "
New device" (see also the
section "Adding a new Bluetooth device" on
page 61).
7. Sign on the desired device.
Deleting a destination
1. Press the f button.
2. Select "
Stored destinations".
The personal destination memory is opened.
3. Select the desired destination.
4. Select "
Edit"
> "
Delete".
Deleting a destination from the list
5. Confirm the message that appears by
selecting "
Yes".
The chosen destination is deleted from the list.
Deleting the entire list
5. Select "
Delete list"
> "
Delete all".
The entire personal destination memory is
deleted. This deletion operation also affects
the two personal destinations "
GO HOME"
and "
GO TO OFFICE".
Points of interest
Points of interest are gas stations, parking
structures, restaurants, hotels, or hospitals, for
example.
They are divided into different categories to make
them easier for you to find.
This function is also available in reduced form in
the i menu of the map display under the
"
Search POI" menu item.
Searching for points of interest by
category
1. Press the f button.
2. Select "
POI"
> "
Category".
A list of the available categories is opened.
3. Select the desired category from the list.
A list containing the subcategories is opened.
4. Select the desired subcategory.