User's Manual

PCM Controls 15
Making personal settings
Selecting the audio source
By pressing the a button, you open a
window where you can set the current audio
source.
The window closes again:
– once you have selected an audio source,
– if a few seconds pass without any input from
you.
1. Press the a button.
2. Select the desired audio source on the display.
Always displaying all audio sources in the
window
The audio sources "iPod" and "USB" are only
displayed if there is a corresponding device
connected to the interface. If both of these audio
sources are always to be displayed (even if there
is no device connected to the PCM), you must
activate their display in the SET menu.
You can also activate or deactivate the audio
source "AUX" (external audio source) in the SET
menu.
1. Press the n button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET DISC / AUX".
You will only be able to access the "
SET DISC /
AUX" menu if there is at least one CD/DVD
inserted or at least one audio source activated
() in the menu.
4. Select the appropriate audio source to activate
( ) or deactivate ( ) its display.
Configuring the PCM display
You can set various units, the date and time, the
welcome display as well as the operating
language of the PCM in the "
Regional settings"
menu.
Setting the language
1. Press the d button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PCM system"
>"
Regional settings"
>"
Language".
4. Select the desired language.
Setting the date
(can only be set if the PCM is not equipped
with a navigation system)
1. Press the d button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PCM system"
>"
Date & time"
>"
Date".
4. Set the date by selecting the corresponding
numerical fields.