User's Manual

156 Voice Control
The following options are then available for you to
select:
–"
Repeat"
The voice control system repeats all
recognized commands. You can switch off
this repetition. Switching it off makes using
the voice control system faster but this
comes at the price of not knowing whether
the voice control system has correctly
recognized the command given.
Voice entries and digits are always repeated,
even if the function is switched off.
–"
Quick dialog"
If you switch on this function, the PCM
outputs certain announcements in an
abridged form. This does not change the
information content of the announcements.
This option is useful for experienced users.
–"
Show hints"
This function is switched on ex-factory. If it is
switched on and voice control is activated,
the PCM shows you commands that are
available in addition to the menu items
already shown.
4. Select the desired function to activate ( ) or
deactivate it ( ).
Performing voice adaptation
The voice adaptation function allows you to
individually adapt the voice control system to your
voice, thereby improving thereby improving the
system's voice recognition. This does not impair
the recognition of other users.
 Adaptation can only be performed when the
vehicle is stationary. Please note the first five
points in the section "Speech intelligibility" on
page 152 in connection with this.
Starting/canceling voice adaptation
1. Press the d button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PCM system"
>"
Voice control"
> "
Voice adaptation".
4. Select "
Start adaptation".
Adaptation starts and commences interaction
with the user.
5. Follow the instructions of the PCM and repeat
each command and numerical sequence after
the tone.
Adaptation ends automatically after the last
command and the data is automatically stored.
6. Select "
Cancel" to cancel adaptation.
In this case no data is stored.