User's Manual

18 PCM Controls
Choosing the colors for the map display
(day/night design)
1. Press the d button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PCM system"
>"
Display".
4. Select "
Day/night switchover".
The following options are then available for you
to select:
–"
Automatic"
Your PCM automatically switches from day
design to night design as a function of the
vehicle lighting.
–"
Day"
Your PCM always remains set to the day
design colors. This means the display colors
are optimized for legibility.
–"
Night"
Your PCM always remains set to the night
design colors. The display colors are shown
dimmed to prevent any dazzle effect.
5. Set the desired option by selecting it.
Choosing the brightness of the display
1. Press the d button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PCM system"
>"
Display"
>"
Display"
>"
Brightness".
4. You can set the brightness by selecting the two
symbols and .
Switching the touchscreen on and off
1. Press the d button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PCM system"
>"
Display"
>"
Display".
4. Select "
Touchscreen off" to activate ( ) or
deactivate ( ) the function.
Making sound settings
You can define the sound of your PCM for each
audio source using the sound settings in the
Sound menu. As soon as an audio source is
selected, your sound settings are automatically
set.
The scope of the display and functions for the
sound settings depends on the vehicle model and
the respective equipment. In some cases,
therefore, not all the functions described here will
be available.
Setting the bass
1. Press the b button.
2. Select "
Bass".
3. Make the desired setting by selecting the two
symbols and .
Setting the treble
1. Press the b button.
2. Select "
Treble".
3. Make the desired setting by selecting the two
symbols and .