User's Manual

TUNER 25
Setting the Traffic prog. volume
The traffic program volume refers to the volume at
which the traffic program announcements are
output.
It specifies the minimum volume as a function of
the volume of the currently selected audio source.
1. Press the b button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
Traffic prog.".
4. Make the desired setting on the scale by
selecting the two symbols and .
Making settings for radio mode
Switching RBDS on and off
The PCM is capable of receiving and evaluating
RBDS signals (RBDS = Radio Broadcast Data
System) in FM mode. It supports the following
functions:
– station name,
– program type (PTY),
–traffic program,
– radio text as well as
– detection of alternative frequencies.
(Radio stations transmit programs with the
same program content on different
frequencies in different regions.)
You can switch tracking of these alternative
frequencies on and off in the Set menu.
1. Keep pressing the m button until
FM is
highlighted.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET FM".
4. Select
"RBDS" to switch the function on ( ) or
off ( ).
Switching RDS radio text on and off
1. Keep pressing the m button until FM is
highlighted.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET FM".
4. Select "
Radio text" to switch the function on ( )
or off ( ).
Setting sort criteria for the FM station list
The FM station list can be sorted according to
different criteria. You can set the sorting as
follows:
1. Keep pressing the m button until
FM is
highlighted.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET FM".
4. Select "
Sort criteria".
You can then select various radio buttons:
–
Station strength: The station list is displayed
sorted according to field strength. Stations
with good reception are shown at the top of
the list.