User's Manual

46 DISC
External audio source
You can connect an external audio source that is
operated on the source itself rather than on the
PCM to the AUX interface of the PCM.
Calling up the main menu for the external
source
û Keep pressing the n button until the "AUX"
audio source is highlighted in the bottom line.
In order that a connected external audio source
can be selected by the n button, the
interface in the SET menu must be activated.
1. Press the n button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET DISC / AUX".
You will only be able to access the "
SET DISC /
AUX" menu if there is at least one CD/DVD
inserted or at least one audio source activated
() in the menu..
4. Select "
AUX" to activate ( ) or deactivate ( )
the function.
The external audio source cannot be operated on
the PCM, it can only be operated on the device
itself. Please consult the operating instructions for
the respective device to find out how to do this.
 Volume control should mainly be performed
on the external audio source to avoid large
differences in volume (particularly increases)
when changing the audio source.
Recommendation:
û Set the maximum volume on the external
audio source.
û Then set the desired volume on the PCM.
WARNING!
Accident hazard. The distraction could result
in you losing control of the vehicle.
û Operate the external audio source only if
you are safely in control of your vehicle and
when the traffic conditions permit. If in
doubt, stop the car and operate the PCM
while the vehicle is parked.