User's Manual

72 PHONE
Establishing an additional call
You can establish a further call while there is
another call active.
 Some cell phones do not support making or
accepting a second call. If this is the case, the
"
New call" menu item is grayed out while there
is a call active.
1. Select "
New call" in the call menu.
2. You then have the following options for
entering the telephone number:
–"
Dial number":
The input menu for telephone numbers is
opened. To find out more, please refer to the
section "Dialing a number" on page 55.
–"
Phonebook":
You can insert a number stored in the
phonebook. To find out more, please refer to
the section "Calling a phonebook entry" on
page 56.
The active call is retained if the second connection
is established.
You can switch between the two calls or hold a
conference call. To find out more about this,
please refer to the section "Call waiting (swapping)
and conference" on page 59.
Call waiting
The "Call waiting" function is only available if
supported by the network provider.
The "
Call waiting" function must also be activated
in the call settings of the PCM or the cell phone.
To find out more, please refer to the section "Call
waiting (swapping) and conference" on page 59.
Rejecting a waiting call
If you receive another call while there is already
one active, you will hear a call waiting tone.
The menu for the incoming call is displayed and a
message appears in the bottom line.
û Select "
Reject".
The waiting call is rejected. The caller hears
the busy signal.
If the caller's telephone number is transmitted,
the number or name appears in the "
Received
calls" list.
Accepting a waiting call
û Select "
Answer".
The waiting call is accepted and activated. The
previously active call is put on hold.
You then have the option to switch between the
two calls or to hold a conference with both
callers. To find out more, please refer to the
section "Call waiting (swapping) and
conference" on page 59.
The PCM will not accept a third incoming call.
The caller hears the busy signal or is redirected to
the mailbox.
Ending an active call
1. Select "
End active call".
The currently active call is ended and the first
call that is on hold is activated again.