User's Manual

90 PHONE
4. Select one of the following settings for the call
diversion:
–
Divert all
activates call forwarding for all incoming
calls.
–
Busy
activates call forwarding for calls that come
in while you are on another call.
To be able to activ ate ca ll forw arding with the
"
Busy" setting, the "Call waiting" function
must be switched off.
–
No answer
activates call forwarding for calls that you
cannot or do not want to accept. The call is
forwarded to the entered number after a
certain time.
–
Cannot be reached
activates call forwarding for calls that come
in while the telephone is switched off or is
not ready to receive calls.
–
Cancel all
deactivates all call diversions at once. The
telephone numbers entered for the individual
call diversions remain saved in the network
and are displayed again the next time call
forwarding is activated.
5.
Select "Switch on".
The input menu is opened.
6. Enter the desired telephone number for the call
diversion and confirm your entry by selecting
"
OK".
- or -
Select "
Phonebook".
After selecting
Phonebook, you can select a
number from the phonebook. The call is then
diverted to this number.
To find out more, please refer to the section
"Calling a phonebook entry" on page 68.
7. If you set the "
No answer" call diversion type,
you also need to set the delay after which the
calls are to be diverted.
Select "
Delay".
Set the desired delay by selecting it in the list
that appears.
The relevant call diversion is then activated
and the settings are shown on the display.
Checking the status of the call diversion
1. Select the desired type of call diversion.
2. Select "
Check status".
The current status is then queried in the
network and shown on the display after a few
seconds.
Deactivating call diversion
1. Select the desired type of call diversion.
2. Select "
Switch off".
The corresponding call diversion is
deactivated.
Switching the "Call waiting" function on
and off
If the "Call waiting" function is activated, an
incoming call will be indicated during an active
call.
The caller hears the dialing tone.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PHONE"
>"
Call settings"
> "
Call waiting".