Take&Talk Universal Installation and operating manual
Take&Talk Universal Index Introductory information 1. General 2. Security guidelines Installation of the system 3. Scope of supply 4. Installation of the system 5. Installing the Take&Talk Universal in the vehicle 6. Positioning and removing the mobile phone 7. Turning the cradle 8. Initialising the Take&Talk Universal Operating guidelines 9. Establishing a Bluetooth connection 10. Overview of the key functions 11. Charging the phone in the cradle Further information 12. Service 13.
Introductory information 2 1. General Dear customer, Congratulations on purchasing a BURY telephone holder for cellular phones. You have chosen a high quality product that is extremely easy to use. Please read the installation manual carefully so that you can fully enjoy your BURY product. If you have any further questions concerning installation or operation of this device, please contact your dealer. He will be happy to give you reliable advice. You can also contact our hotline.
3 Use while driving Operate the smartphone in the holder only when the situation allows it and when you do not endanger, harm, constrain, or annoy other road users. The volume of the smartphone has to be set in a way that exterior noise is still audible. Important: XXThe driver is ultimately responsible for the safe operation and control of their vehicle at all times.
4 Installation of the system 3.
5 The Take&Talk Universal is supplied with different combinations of components, depending on the sales regions (countries). The operating manual refers to all versions.
6 Installation of the system 4. Installation of the system Important: XXWhen positioning the cradle please take care that the device does not impair the view onto the road, that it will not be installed in the impact zone of the passenger compartment (amongst others in the airbag inflation zones) and that the cable may be laid without any problems. XXPlease avoid direct sunlight on the device or high internal temperatures, which can be rapidly reached in parked vehicles.
7 Step 2: Adapting the Take&Talk Universal to the size of the mobile phone Important: XXBefore you begin to adjust the cradle to fit your particular mobile phone, it is important that you set the cradle to the closed position. This can be done by pushing the top of the cradle down until the locking button on the right side of the cradle, pops out with an audible “click”. To be able to adapt the cradle to the size of the mobile phone lift all of the adjustment locks by pressing the release buttons 1, 2, 3.
8 Installation of the system Insert the mobile phone into the cradle. Firstly, adjust the lower width of the cradle to the width of the mobile phone and press button 1 in order to block the set position. Next adjust the height and the upper width of the cradle to the height and width of the phone and press in keys 2 and 3 in order to block the set positions. Please note: XXIt is possible to set all positons of the cradle at the same time by lightly pressing button 1, 2 or 3.
9 Step 3: Adjusting the corner fastener 4 3 1 2 Adjust the corner fastener to the thickness of the phone – increase the depth by turning it in a clockwise direction, tighten it by turning it anticlockwise. 5. Installing the Take&Talk Universal in the vehicle Place the Take&Talk Universal cradle in the BURY BasePlate.
10 Installation of the system Important: XXThe correct mounting of the Take&Talk Universal in the BURY BasePlate is signalled by a perceptible ‘clicking’ sound. Removing the Take&Talk Universal cradle from the BURY BasePlate. Important: XXBefore you remove the cradle from the BURY BasePlate you will have to remove the blocking mechanism by pressing the locking button on the right hand side of the BURY BasePlate.
11 6. Inserting and removing the mobile phone Insert the smartphone in the Take&Talk Universal cradle. Before you insert the smartphone in the cradle, release the holding mechanism by pressing the locking button in. The locking button is situated on the right hand side of the cradle. If necessary, remove the protective cover from your smartphone. Place the smartphone in the cradle from above. Press the top part of the cradle downwards and you will hear the smartphone click into the cradle.
12 Installation of the system Removing the smartphone from the Take&Talk Universal cradle. To release the locking mechanism press the button on the right hand side of the cradle. Now remove the smartphone by lifting it out of the cradle.
13 7. Rotating the cradle You can turn the smartphone by 180 degrees (90 degrees to the left or right accordingly) together with the cradle. Rotate your device to best suite the application you are using. Used in the landscape (horizontal) format, most smartphones will adjust the text size and websites images automatically making them easier to read. Using the cradle to the landscape format also gives more space for the onscreen keyboard making it easier to enter text data.
Operating guidelines 14 9. Establishing a Bluetooth connection If you wish to establish a Bluetooth connection for the first time, you have to activate the Bluetooth function of your mobile phone and search for Bluetooth devices. In this case search for a device labelled „T&T Universal ...”. If several devices were identified, please select the Take&Talk Universal and enter the PIN number 1234. The Bluetooth connection (pairing) will then be established between your smartphone and the Take&Talk Universal.
15 After switching the Take&Talk Universal on the system will connected with the smartphone that was most recently connected. The condition for this is that this phone is in the vehicle, the Bluetooth function is activated and the interfacing identification to the cradle has not been deleted. If another phone rings suring the current phone call then the incoming call can be declined by pressing the end button on the phone.
- When Take&Talk Universal is Connected connected with phone, no call When Take&Talk Universal is connected with phone and incoming call is present When Take&Talk Universal is connected with phone and call is active - - Multipoint on/off (4 same beeps is on) Save the phone number of current connection - Save the phone number Volume down of current connection - - Connecting with last connected phone, if not available try to connect to a phone from phone list Accept call Press Minus key short Ho
17 11. Charging the phone in the cradle If a corresponding cable is connected to the telephone, the smartphone that is positioned in the Take&Talk cradle will be supplied with electrical power (please refer to the picture). The conduction of the electricity supply occurs from the BURY BasePlate. In this context it is of no importance as to whether or not there is active Bluetooth connection between the mobile phone and the Take&Talk Universal.
18 Further information 12. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: Administration: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 D-32584 Löhne Germany Producer: BURY Spółka z o.o. ul. Wojska Polskiego 4 39-300 Mielec Poland Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min.
19 13. Appropriate use of this system The Take&Talk Universal is only intended for use with Bluetooth mobile telephones and music playback systems in motor vehicles. When using this system, please comply with the regulations and laws specific to the country in which you are driving and the instructions provided in the guidebook for the mobile telephone that you are using. 14.
20 EXPRESS WARRANTY AGAINST DEFECTS – AUSTRALIA: This product if imported by Point to Point Distributions Pty Ltd is warranted in Australia to be free from any defect in material and workmanship, subject to the following terms and conditions. Who provides this warranty: Point to Point Distributions Pty Ltd Unit 9, 7-8 Len Thomas Place Narre Warren Vic, 3805. Tel: +61 3 8794 1800 Email: service@ptpdist.net.
