Installation manual

16
Operating guidelines
10. Overview of the key functions
Take&Talk Universal
Status
Status
description
Press Plus
key short
Hold Plus
key for
3 seconds
Press Minus
key short
Hold Minus
key for
3 seconds
Hold Plus and
Minus key for
3 seconds
Press Minus
key twice
Hold Plus and
Minus key for
6 seconds
Press Plus
key twice
Stand-by
When Take&Talk
Universal is
not connected
with phone
-
Connecting with
last connected
phone, if not
available try
to connect to
a phone from
phone list
- - - - Reset to default -
Connected
When Take&Talk
Universal is
connected with
phone, no call
-
Multipoint
on/off
(4 same beeps
is on)
-
Disconnect
Bluetooth
Turn on / off
DSP* in the hone
(Tones up is on,
Tones down is
off)
Redial Reset to default
Calling the last
saved number
Ring
When Take&Talk
Universal is
connected with
phone and
incoming call
is present
- Accept call - Rejects call
Turn on / off
DSP* in the
device (Tones up
is on, Tones down
is off)
- - -
Active call
When Take&Talk
Universal is
connected with
phone and call
is active
Volume up
Save the phone
number
of current
connection
Volume down Quit call
Turn on / off
DSP* in the
device (Tones up
is on, Tones down
is off)
- - -
Outgoing
call
When Take&Talk
Universal is
connected with
phone and call
is active
-
Save the phone
number
of current
connection
- Quit call
Turn on / off
DSP* in the
device (Tones up
is on, Tones down
is off)
- - -
*DSP = to lter out echoes and background noise