MODEL HM66315A HM66615A HM66915A HM66115A A174577
IT’S AS EASY AS 1,2,3 Assembly tips: 1. Read the instructions and become familiar with the parts. 2. Ensure this carton contains all parts, fasteners and hardware. 3. To protect floors, assemble the furniture on the carton. 4. An assistant may be helpful. 5. Use of power tools is not recommended. Conseils d’assemblage: 1. Lisez les instructions et familiarisez-vous avec les pièces. 2. Assurez-vous que le carton contient toutes les pièces, toutes les pièces de fixation et toute la quincaillerie. 3.
IMPORTANT SAFETY INFORMATION WARNING This product is designed and intended for use with computer, fax, and printer equipment only. Improper loading with television or other heavy equipment could cause instability, tip over, and/or serious injury. Este producto esta diseñado solamente para el uso con computadors, faxes, e impresoras. Inapropriado uso al poner televisores u otro equipo pesado puede causar inestabilidad, rodamiento, y/o herida (golpes) serios.
IMPORTANT SAFETY INFORMATION WARNING WARNING Do not load unit without properly attaching back panel. Doing so could cause instability, product collapse, and/or serious injury. No cargue esta unidad sin el panel de atrás. Hacerlo puede causar inestabilidad, que el producto se derrumbe, y/o heridas (golpes) serias. Ne pas charger le produit sans attacher correctement le panneau arrière. Faire ainsi peut causer l'instabilité ou l'effondrement du produit et peut vous causer des endommagements sérieux.
IMPORTANT SAFETY INFORMATION NOTICE (STEP 19) This compartment is intended to hold computer equipment. The door must be kept open when equipment is operated. Failure to do so could restrict airflow and may result in equipment overheating. El compartimiento está diseñado para acomodar un computador. La puerta debe mantenerse abierta mientras el equipo es operado.El no mantener la puerta abierta durante la operación puede restringir el flujo de aire y resultar en el computador calentarse demasiado.
EXPLODED VIEW MODEL HM66315A HM66615A HM66915A HM66115A S W M P Y D R Q X N K Y E A J C Q L V B T I V U O 1 - 800 - 950 - 4782 H G F B C A174577
EXPLODED VIEW A B C D E F G H I [1] [2] [2] [1] [1] [1] [1] [1] [1] W152996 W157846 W152997 W174569 W136469 W174570 W136471 W136472 W159107 HM66315A J [1] S152901 K [1] W159108 L [1] W159109 M [1] W152904 N [1] W136477 O [1] W159899 P [1] W136479 Q [2] W159053 R [1] W159054 A B C D E F G H I [1] W159090 [2] W159091 [2] W159092 [1] W174571 [1] W159094 [1] W174572 [1] W159096 [1] W159097 [1] W159098 HM66615A J [1] S159099 K [1] W159100 L [1] W159101 M [1] W159102 N [1] W159103 O [1] W159900 P [1] W1591
EXPLODED VIEW A B C D E F G H I [1] [2] [2] [1] [1] [1] [1] [1] [1] W170304 W170305 W170306 W174575 W170308 W174576 W170310 W170311 W170312 HM66115A J [1] S170313 K [1] W170314 L [1] W170315 M [1] W170316 N [1] W170317 O [1] W170330 P [1] W170319 Q [2] W170320 R [1] W170321 1 - 800 - 950 - 4782 S T U V W X Y [1] W170322 [1] W170323 [1] W170324 [2] W170325 [1] W170326 [1] W170327 [2] W170329 A174577
FASTENERS Fastners are shown in actual size. Los fijadores son demonsrtados en su tamaño actual. Les attaches sont montrées dans l'échelle grandeur.
HARDWARE H100444 H154711 Quantity 4 Quantity 4 H100446 Quantity H136463 Quantity 2 2 H137197 H156859 414mm H137199 H137200 H137201 H137202 H156829 Quantity 10 H27145 1 - 800 - 950 - 4782 Quantity 1 A174577 Quantity 5 Quantity 2
HARDWARE HM66315A H159895 HM66915A Quantity 18 HM66615A H95137 H73621 Quantity 18 HM66115A Quantity 18 1 - 800 - 950 - 4782 H170033 Quantity 18 A174577
Common assembly techniques. Técnica común de ensamblaje. Techniques communes d'assemblage.
STEP 1 H159917 [2] H137199 [1] H156825 H136463 [2] [3] E 1 - 800 - 950 - 4782 A174577
STEP 2 H137199 [2] H137200 [1] H156825 D H137200 D 1 - 800 - 950 - 4782 A174577 [9]
STEP 3 H156849 [2] H159916 [2] Raw Side Lado Crudo Cote Brut 1 - 800 - 950 - 4782 A174577
STEP 4 H156849 [2] D N 1 - 800 - 950 - 4782 A174577
STEP 5 H137200 [2] H159917 [4] H156825 F 1 - 800 - 950 - 4782 A174577 [6]
STEP 6 H159916 [4] E N F 1 - 800 - 950 - 4782 A174577
STEP 7 [4] H156829 1-1/4" 32mm E 1-1/4" 32mm F 1 - 800 - 950 - 4782 A174577
STEP 8 H137197 [5] H156823 [ 10 ] E H F 1 - 800 - 950 - 4782 A174577
STEP 9 H159917 [4] x2 H156854 B [4] H27145 1 - 800 - 950 - 4782 A174577
STEP 10 H159916 [4] H27145 C B 1 - 800 - 950 - 4782 A174577
STEP 11 H159917 [ 12 ] H159916 [ 10 ] C B B C A 1 - 800 - 950 - 4782 A174577
STEP 12 [6] H156829 B 1" 25mm 1" 25mm C B C A 1 - 800 - 950 - 4782 A174577
STEP 13 H156849 [2] H159916 [ 10 ] With an assistant carefully stand unit upright. Con un asistente cuidadosamente levante la unided a una posicion vertical. Avec l'aide d'un assistant placez soigneusement l'unité debout.
STEP 14 H156849 [2] E 1 - 800 - 950 - 4782 A174577
STEP 15 H159917 [6] M 1 - 800 - 950 - 4782 A174577
STEP 16 E 1 - 800 - 950 - 4782 A174577
STEP 17 H156826 [ 35 ] 2mm 1/16" P WARNING Do not load unit without properly attaching back panel. Doing so could cause instability, product collapse, and/or serious injury. No cargue esta unidad sin el panel de atrás. Hacerlo puede causar inestabilidad, que el producto se derrumbe, y/o heridas (golpes) serias. 1 - 800 - 950 - 4782 Ne pas charger le produit sans attacher correctement le panneau arrière.
STEP 18 H136463 [2] 1 - 800 - 950 - 4782 A174577
STEP 19 J 1 - 800 - 950 - 4782 A174577
STEP 20 H100444 [2] H157125 [2] H160125 [4] H156824 [4] K H157125 Q H160125 S Y H160125 W For drawer front adjustment please proceed to step 26. Para ajustes de la parte delantera de las gavetas favor proceda al paso #26. Pour l'ajustement de la façade de tiroir veuillez procéder à l'etape 26.
STEP 21 H137201 [1] H137202 [1] H152964 [2] H154711 [1] H156825 [6] H137201 Q H152964 K Y 1 - 800 - 950 - 4782 A174577
STEP 22 H100444 [2] H157125 [2] H160125 [4] H156824 [4] L H157125 Q H160125 R Y H160125 V For drawer front adjustment please proceed to step 26. Para ajustes de la parte delantera de las gavetas favor proceda al paso #26. Pour l'ajustement de la façade de tiroir veuillez procéder à l'etape 26.
STEP 23 H100446 [2] H157125 [4] H160125 [4] H156824 [4] I H156824 T H156824 H160125 O U H160125 V For drawer front adjustment please proceed to step 26. Para ajustes de la parte delantera de las gavetas favor proceda al paso #26. Pour l'ajustement de la façade de tiroir veuillez procéder à l'etape 26.
STEP 24 H137201 [2] H137202 [2] H152964 [4] H156859 [2] H154711 [2] H156825 [ 12 ] H152964 H137202 L I H137202 1 - 800 - 950 - 4782 A174577
STEP 25 L I 1 - 800 - 950 - 4782 A174577
STEP 26 - Move unit to final location. - Coloque esta unidad en su posición permanente. - Déplacez l'unité dans l'endroit final. - Adjust drawer fronts as shown below. - Ajuste la parte delantera de las gavetas segun es indicado. - Ajustez les façades de tiroir comme montr é ci-dessous. STEP 1. Loosen screws on back of drawer front brackets as shown. Afloje los tornillos en la parte trasera de la gaveta segun es indicado.
STEP 27 Maximum Weight: 50 Lbs. Peso Máximo: 50 Libras Poids Maximum: 22.7 kilogramme Maximum Weight: 13 Lbs. Peso Máximo: 13 Libras Poids Maximum: 5.9 kilogramme Maximum Weight: 50 Lbs. Peso Máximo: 50 Libras Poids Maximum: 22.7 kilogramme Maximum Weight: 200 Lbs. Peso Máximo: 200 Libras Poids Maximum: 90.9 kilogramme Maximum Weight: 55 Lbs. Peso Máximo: 55 Libras Poids Maximum: 24.9 kilogramme Maximum Weight: 15 Lbs. Peso Máximo: 15 Libras Poids Maximum: 6.8 kilogramme Maximum Weight: 35 Lbs.
WARRANTY INFORMATION/INFORMATIONS POUR LA GARANTIE/INFORMACIÓN DE GARANTÍA BUSH FURNITURE’S WRITTEN WARRANTY TO YOU In order to provide you with timely assistance, please thoroughly inspect your furniture for missing or defective parts immediately after opening the carton. To receive replacement or missing parts under this warranty, call our Consumer Service Department TOLL-FREE at 1-800-950-4782. Please have the Model, Part, and Lot Numbers found in the instruction manual available for your reference.
