Flat Panel Television User Manual

INTSTALLATION
INSTALLATION NOTES
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC
supply or any other power supply.
Locate the TV in the room where light does not strike the screen . Total darkness or
a
reflection on the picture screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm
locations to prevent possible damage to the cabinet or
premature component failure.
Do not cover the ventilation openings when using the TV.
WALL MOUNTING INSTALLATION GUIDELINES
This television can be wall mounted as follows:
1.Place the LCD Television onto a solid surface. Please place some soft material to
over the front of the screen to avoid any damage.
2.R
emove the screws from the lower part of the television, where the base joins to the
TV, and take away the stand (put the stand somewhere safe for future use).
3.Use the four screws provided to f ix the TV ont
o a wall mounting bracket via the 4
VESA standard holes on the back of the television.
-4-
100 mm
100 mm