IDLCD2604HD The Gold Technical Support Line: 1902 215 259 Personal Product Support (Charges will apply at $2.
INTRODUCTION Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit s many features and to ensure you get the very best from your purchase. Safety is important Your safety and the safety of others is important. Therefore, please ensure you read the Safety Instructions before you operate this unit.
CONTENTS 1. INTRODUCTION........................................................................1 2. SAFETY INSTRUCTIONS...........................................................3 3. INSTALLATION......................................................................... 4 WALL MOUNTING INSTALLATION GUIDLINES.............................4 ACCESSORIES..........................................................................5 FRONT PANEL.....................................................................
SAFETY INSTRUCTIONS 1. Do not use this apparatus near water. 2. Clean only with dry cloth. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 5. Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles, and the point where they exit from the apparatus. 6.
INSTALLATION INSTALLATION NOTES This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other power supply. Locate the TV in the room where light does not strike the screen . Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV and the wall to permit ventilation.
INSTALLATION ACCESSORIES AC Power Cord......................... 1 Infrared Remote Control............ 1 User s Manual ........................ 1 Battery(AAA)........................... 2 FRONT PANEL 3 4 2 1 30 30 1: 2: MUTE POWER NICAM 1 2 3 4 5 6 7 8 9 RECALL 0 TV MENU INPUT ENTER DVB MENU SOUND EXIT PIC CH + + VOL _ _ SLEEP SOURCE ASPECT DISPLAY TEXT FAV EPG INFO REVEAL HOLD LIST INDEX SUBPAGE SIZE AUDIO SUBTITLE 3: 4: Remote control sensor.
INSTALLATION KEY BOARD SOURCE MENU CH+ CHVOL+ VOL- 1 2 3 4 SOURCE To display the input source menu. MENU To display main MENU. CH+/CHIn TV mode to change the channel up and down. In MENU mode, to select the menu items . In standby mode, it can turn on the TV. VOL+/VOLTo adjust sound level. In MENU mode,to select the menu items. REAR PANEL 1 2 3 4 5 1. ANTENNA 2. AUDIO OUTPUT 3. SPDIF OUTPUT 4. VIDEO OUTPUT 5. AV1/S-VIDEO1 AUDIO INPUT 6 7 8 9 10 11 12 6. YPbPr AUDIO INPUT 7.
INSTALLATION ANTENNA CONNECTION Note: Aerial connections:IEC(female). Input impendance:75 unbalanced.
INSTALLATION CONNECTING TO PC STEPS: Be sure both the TV and computer are set to Power off. 1.Connect VGA and audio cable. 2.Connect the power cord. 3.Power on the TV, switch the input source to VGA mode. 4.Power on the PC. This sequence is very important.
INSTALLATION PC PRESET PRESET MODE(recommended resolution is 1024*768@60Hz) RESOLUTION V.Freq.(Hz) H.Freq.(KHz) 1 720*400 70 31.47 2 640*480 60 31.47 3 800*600 56 35.156 4 800*600 60 37.88 5 800*600 75 46.88 6 800*600 72 48.08 7 1024*768 60 48.36 8 1024*768 70 56.48 9 1024*768 75 60.
INSTALLATION CONNECTING TO AV EQUIPMENTS This TV provides two groups of AV, two S-Video, one group of YPbPr for convenient connection to VCR, DVD or other video equipment, three group of HDMI for HD signal input. Please refer to the owner s manual of the equipment to be connected as well. You can use the input terminals on TV set rear as follows.
REMOTE CONTROL BATTERY INSTALLATION 1. Remove the battery cover. 2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit. Remark: 1) Alkaline Battery Recommended.
REMOTE CONTROL KEYS FUNCTION MUTE POWER 1 13 AUDIO 1 2 3 14 2 RECALL 4 5 6 7 8 9 15 0 TV MENU SOURCE 16 3 17 OK 4 18 5 CH.LIST SOUND EXIT 19 + 20 PIC CH + 6 VOL _ _ 7 SLEEP ASPECT 21 8 FREEZE TV/RADIO TEXT 9 22 23 EPG FAV INFO 10 24 11 12 REVEAL HOLD LIST INDEX SUBPAGE SIZE MIX SUBTITLE 25 1: POWER :To set the TV to standby or power on. 2: NUMERIC KEY : For direct access to channels. 3: TV MENU :To display TV menu.
OPERATION BASIC OPERATION TURN ON THE UNIT Press the POWER button on the remote control to switch on the power. The power indicator will light up in green colour, press the POWER button again to switch off the power, and the indicator will change to red. CHANNEL SEARCH Press the SOURCE button on the remote control to select the TV or DTV input mode, and press the OK button to confirm.
OPERATION TELETEXT Press: T EXT E Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.) You will obtain: This is used to enter or exit teletext mode. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number.
OPERATION EPG (Electronic Programme Guide) The EPG (Electronic Programme Guide) menu is used to look at what is being broadcast on a DTV or Radio channel at a later point in time. Press the EPG button to access the EPG menu, t he detailed programme information of the channel currently being viewed will be displayed. PROGRAMME GUIDE 20 Feb 2006 16:07 DTV 801 France 4 1555.
OPERATION MENU OPERATION 1.CHANNEL MENU The first item of the menu is CHANNEL menu( for TV source only). CHANNEL Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit MENU EXIT OK You can search channels and edit programs here. 1).Auto Tuning:Search all the channels automatically(ATV, DTV & Radio) Please select country first then select Start to update info Country selection Australia Start Cancel Press the buttons to select country then press the buttons to select start or cancel.
OPERATION 3). ATV Manual Tuning :You can change the sound system to search the analog TV channels and fine tune the channels, then store the channels you selected. ATV Manual Tuning Storage To System BG Current CH 1 Search Fine-Tune Skip Yes Frequency 255.25MHz EXIT SAVE Storage To: To select the channel number you want to save to. System: To select the TV sound system. Current CH: To select the current channel. Search: To search backward/forward.
OPERATION 2. PICTURE MENU The second item of the menu is PICTURE menu. You can adjust picture effect here, including contrast, brightness and colour as well as other picture functions. Press the buttons to select items and press the buttons to adjust.
OPERATION 4.TIME MENU The forth item of the menu is the TIME menu. You can adjust the clock, power on/off time, sleep timer and time zone as well as other time clock functions. Press the buttons to select and press the buttons to adjust.
OPERATION 6.LOCK MENU The sixth item of the menu is the LOCK menu. You can lock system, set password, block program, set parental guidance, restore factory default and set maximum volume control. LOCK Lock System Off Change Password Block Programme Parental Guidance Off Restore Factory Default Max Volume EXIT 100 MENU OK To enter the LOCK menu, the password will be requested, the default password is 6666 LOCK System: Press the buttons to turn ON or OFF.
TROUBLESHOOTINGS Problem Check Picture Audio Snow Noise antenna position, direction or connection Ghost Normal audio antenna position, direction or connection Interference Noise electronic equipment,car/ motorcycle,fluorescent light Normal Picture Mute Volume(check if mute is activated or if the audio system connections are not correct) No picture Mute Power cord is not inserted Power switch is not opened Contrast and brightness/volume setup Press standby key on the remote control for inspe
TECHNICAL SPECIFICATIONS LCD : Vie wIng Picture Size(diagonal) 26 Resolution 1366x768 Aspect Ratio 16:9 Display colours 16.2M Brightness 400 CD/M Contrast ratio 800:1 Response time 8 ms View angle 160(H)/150(V) 2 TV: TV system DVB-T decode DVB-T de-modulation Digital TV: DVB-T Analog TV: PAL/SECAM Audio: MPEG2 Audio Layer I&II Video: MPEG2 Transport MP@HL Demodulator : COFDM OFDM Mod.
WARRANTY Please keep your receipt as proof of purchase. This product is under one year warranty for any defects in the materials or workmanship, after the original date of purchase. This product is for normal domestic and office use only. This warranty does not cover damage from misuse or neglect, accidental damage, vermin infestation, excessive voltages such us lightning or power surges or any alteration that affects the performance or reliability of the product.
