User guide

11
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
IMPORTANT - Before drilling any holes in the wall ensure
you are not drilling where there could be any electric wires,
water or gas pipes.
This TV requires a VESA 400 x 400 wall mounting bracket
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the
mounting holes on the rear of the TV. These holes
are indicated in the picture below.
Detaching The Stand And Wall Mounting
Detaching the Stand
Wall Mounting the TV
For optimum viewing, if wall mounting the TV higher
than eye level, the TV should be tilted downwards so
that the TV’s screen is ‘face on’.
See fi g 1 and 2 below.
IMPORTANT – If wall mounting this TV, only use the
screws already provided in the wall mounting holes.
Using other screws which are longer could cause
irreparable damage to internal parts.
TV
fi g 1
fi g 2
Viewing angle
Viewing angle
INCORRECT
CORRECT
TV
6 x
M (4x16)
4 x M(4x14)
For 42/333ART3D models only. To detach the stand
please remove the 6 screws highlighted then remove
the stand neck and base from the rear of the TV set.
For 47/333ART3D models only. To detach the stand
please remove the 4 screws highlighted then remove
the stand neck and base from the rear of the TV set.
UserGuide - Bush -42-333ART Bush - 42-333ART3D 47-333ART3D.indd Sec1:11UserGuide - Bush -42-333ART Bush - 42-333ART3D 47-333ART3D.indd Sec1:11 9/2/2013 3:17:35 PM9/2/2013 3:17:35 PM