User guide

25
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
Auto Adjust
Lets you automatically confi gure the television to be
used as a computer monitor
H Offset
Changes the horizontal position of the picture
V Offset
Changes the vertical position of the picture
Size
Increase picture size
Phase
To adjust delay time of phase in order to reduce the
noise of picture
Position Reset
Changes back to the factory settings
Tip: If the computer is left in-active for a period of
time, the television will switch into a ‘sleep’ state (the
screen will power off to save power). To switch back
on press the standby button.
PC Settings
To access this menu, press [MENU] button on the
remote control. To enter a menu press [OK]
If you wish to make changes to any of the default
settings, use the scroll buttons. To confi rm
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
AV
AV
AV
AV
AV
AV
A
UserGuide - Bush -42-333ART Bush - 42-333ART3D 47-333ART3D.indd Sec1:25UserGuide - Bush -42-333ART Bush - 42-333ART3D 47-333ART3D.indd Sec1:25 9/2/2013 3:17:45 PM9/2/2013 3:17:45 PM