Instruction Manual

ManualsBrandsBush ManualsCD-playersDAB Boombox with CD Player - Black

Using your DAB Radio Boombox

Let’s get started

Using your DAB Radio Boombox

Let’s get started

Using your DAB Radio Boombox

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

Audio mode

The Boombox will automatically switch between Stereo and Mono, depending on the

quality of the signal being received but you can override this function and manually switch

between ‘Stereo’ and ‘Mono’.

1. Press and hold the Menu/Info button to enter the menu options. Use the Rotary tune

wheel to move to ‘<Audio setting>’. Press and release the Select button.

There are now two different options of ‘Forced mono’ and ‘Stereo allowed’ and the

current setting will have an ’*’ next to it.

2. Use the Rotary tuning wheel to move to and choose from the two options available.

Press and release the Select button to confirm.

3. Press and release the Menu/Info button to exit from the Menu.

Storing an FM station preset

Your Boombox can store up to 10 FM radio stations in its preset memories for instant

access to your favourite stations.

1. Tune the Boombox to the FM radio station that you wish to preset.

2. Press and hold the Preset button for approximately 2 seconds until ‘Preset Store’ is

displayed.

3. Use the Rotary tune wheel to move to the preset location that you would like to store

the radio station to (1-10).

4. Press and release the Select button. The display will confirm ‘Preset X stored’, where ‘X’

is the number of the preset (1-10).

Note: If there is already an existing FM station stored under a preset, it will be over

written when you store the new station.

Tune to an FM station preset

In FM mode:

1. Press and release the Preset button. ‘Preset Recall’ is displayed together with the

number of the current preset location.

2. Use the Rotary tuning wheel to move to the Preset location and station that you would

like to listen to (1-10).

3. Press and release the Select button. The Boombox will tune to that station and begin

to play.

Note: If no FM station has been stored under the preset button, ‘Preset Empty’ will be

displayed, then the Boombox will revert to the previously selected radio station after a

few seconds.

FM display information

When listening to an FM station you can change the information that will appear on the

second line of the display. There are several different types of information that are sent by

the broadcaster.

• Radiotext (RT)

This is scrolling text information supplied by the broadcaster. Information could be the

name of an artist or music title, DJ’s name, contact details for the radio station etc.

• Program Type (PTY)

Such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’

• Station name or frequency

Such as BBC R4 or 92-95MHz

• Audio mode

The Boombox will automatically switch between Stereo and Mono, depending on the

quality of the signal being received but you can override this function and manually

switch between ‘Stereo’ and ‘Mono’. Please refer to ‘Audio Mode’ on page 28.