Instruction Manual

ManualsBrandsBush ManualsAppliancesBuilt In Double Electric Oven - Black

Using your Built-in oven

Getting the most from your appliance

Programming overview

Setting the clock

The clock is preset to 12:00, and will revert to this after a

power failure. Press Menu (7) and press repeatedly until the

clock indicator flashes (5), while the clock indicator flashes,

touch ‘-’ (6) or ‘+’ (8) to set the time. When you set the correct

time, the clock will set after approximately five seconds delay

and the indicator will disappear.

Minute minder

The minute minder can be used when the oven is switched on

or off. It can be set for up to 23 hours and 59 minutes.

To set the minute minder:

1. Press Menu (7) and press repeatedly until the until the

minute minder indicator (5), (2) flashes (Fig. 4.2).

2. Then press either the ‘-’ (6) or ‘+’ (8) to select the

required duration for the minute minder (2). When you have

set the duration, touch Menu (7) or wait for approximately five

seconds. The minute minder indicator (5) will stay on to

confirm the minute minder is on.

3. When the countdown is complete, there will be an

alarm which will continue for two minutes and the minute

minder indicator will flash. To switch off the alert beep, touch

any key.

Note: The alarm will cut off after two minutes if it is not

switched off manually.

At the end of the countdown, the minute minder will not

switch off the oven. Remember to turn off the oven manually.

Semi-automatic cooking

The lower oven can be set to switch off automatically with a preset time of 10 hours.

This features works by knowing the cooking duration. For example if the time is 13:30 and

the food is required to bake for 45 minutes, the lower oven will stop working at 14:15.

1. Select your desired oven function and temperature (the oven will switch on).

2. Press Menu (7) and press repeatedly until the cooking time indicator flashes .

3. Then press either the ‘-’ (6) or ‘+’ (8) to select the required duration to set the semi-

automatic cooking. When you have set the duration, wait for approximately five seconds.

The cooking time indicator will light up to confirm the semi-automatic program is on.

4. When the cooking time is complete, the oven will emit an alarm, switch off the

function and oven light. The alarm will continue for two minutes and the cooking time

indicator will flash. To switch off the alarm, press any button.

At the end of the cooking programme, remember to turn off the oven manually

Using your Built-in Oven

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,