Instruction Manual
Table Of Contents

6
Safety information
Important - Please read these instructions fully
before
installing or operating
INSTALLATION WARNINGS
IMPORTANT: This product MUST be installed by a
qualified installer in accordance with local
regulations.
IMPORTANT: Prior to Installation ensure that the local
supply conditions (electricity voltage and frequency)
are compatible with the requirements of your cooker
hood.
IMPORTANT: Carefully unpack and examine the
appliance for any damage. If you think there is a
defect, do not use the appliance and contact Bush
Product Support on 01759 487838. Packaging
materials should be collected together and disposed of
immediately as they may be harmful to children.
IMPORTANT: Ensure that the electric supply cable is
not trapped or damaged during installation.
IMPORTANT: Protect your cooker hood against
atmospheric effects. Do not expose your cooker hood
to effects such as sun, rain, snow etc.
WARNING: The cooker hood must be mounted on the
wall in accordance with the dimensions specified in the
mounting diagrams.
DURING USAGE
IMPORTANT: Always replace the aluminium filter of
the cooker hood with an original spare part
otherwise the suction power may be reduced in
addition to the reduction of service life.
WARNING: The LED lamps become hot during use,
do not touch the surface.
WARNING: Disconnect the mains power before
changing bulbs.
CAUTION: This cooker hood must be kept clean. Oil
or residue build up could be a fire hazard.
*GZPVSFRVJSFBOZUFDIOJDBMHVJEBODFPSGJOEUIBUZPVSQSPEVDUJTOPUPQFSBUJOHBTJOUFOEFEBTJNQMFTPMVUJPODBOPGUFOCFGPVOEJOUIF5SPVCMFTIPPUJOHTFDUJPOPGUIFTF
JOTUSVDUJPOT
Safety information
(FUUJOHUPLOPXZPVS
$
PPLFS)PPE