Instruction Manual

Functions
Simple everyday use
Functions24
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Use of the digital timer
Time adjustment
The time must be set before you start using the oven.
Following the power connection, the symbol “A” and
“000” will flash on the display.
1. Press the “+” and “-” keys
simultaneously. Symbol
will appear, and the dot in the
middle of the screen will start
to flash.
2. Adjust the time while the
dot is flashing using the “+”
and “-” keys.
3. After a few seconds, the
dot will stop flashing and will
remain illuminated.
Audible warning time adjustment
The audible warning time can be set to any time
between 0:00 and 23:59 hours. The audible warning
time is for warning purposes only. The oven will not be
activated with this function.
1. Press “MODE”. The symbol
will begin to flash and
“000” will be displayed.
2. Select the desired time
period using the “+” and “-”
keys while is flashing.
3. The symbol will
remain illuminated, the
time will be saved and
the warning will be set.
When the timer reaches zero, an audible warning will
sound and the symbol will flash on the display. Press
any key to stop the audible warning and the symbol
will disappear.
Semi-automatic time adjustment (cooking period)
This function helps you to cook for a fixed period of
time. A time range between 0 and 10 hours can be set.
Prepare the food for cooking and put it in the oven.
1. Select the desired cooking function and the
temperature using the control knobs.
2. Press “MODE” until you
see “dur” and symbol
on the display screen. The
symbol “A” will flash.
3. Select the desired cooking
time period using the “+” and
“-” keys.