Instruction Manual

Functions
Simple everyday use
Functions 25
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
4. The current time will
reappear on the screen, and
the symbols “A”, and
will remain illuminated.
When the timer reaches zero, the oven will switch off
and an audible warning will sound. The symbols “A” and
will flash. Turn both control knobs to the “0” position
and press any key on the timer to stop the warning
sound. The symbols will disappear and the timer will
switch back to manual function.
Semi-automatic time adjustment (finishing time)
This function automatically starts the oven so that
cooking will finish at a set time. You can set an end time
of up to 10 hours after the current time of day. Prepare
the food for cooking and put it in the oven.
1. Select the desired cooking function and the
temperature using the control knobs.
2. Press “MODE” until you
see “end” and
symbol on
the display screen. “A” and
the current time of day will
flash.
3. Use the “+” and “-” buttons
to set the desired finishing
time.
4. The current time will
reappear on the screen, the
symbols “A”, and will
remain illuminated.
When the timer reaches zero, the oven will switch off
and an audible warning will sound. The symbol “A” and
will flash. Turn both control knobs to the “0” position
and press any key on the timer to stop the sound. The
symbol will disappear and the timer will switch back to
manual function.
Full-automatic programming
This function is used to start cooking after a certain
period of time and for a certain duration. A time of up
to 10 hours after the current time of day can be set.
Prepare the food for cooking and put it in the oven.
1. Select the desired cooking function and the
temperature using the control knobs.
2. Press “MODE” until you
see “dur” and
symbol on
the screen. The symbol “A”
will flash.
3. Select the desired
cooking time period using
the “+” and “-” keys.
4. The current time will
reappear on the screen, the
symbols “A”, and will
remain illuminated.
5. Press “MODE” until you
see “end” and symbol on
the screen. The time and the
symbols “A” and will flash.