BHAS01UR POWER CH- CH+ VOL- VOL+ MENU User Guide for Digital TV Receiver Warranty: 1800 022 960
BHAS01UR 2
BHAS01UR Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Main features and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features:......................................................................................4 Remote control............................................................................5 Battery installation..........................
BHAS01UR Introduction This user manual is intended to guide you through the operation for the Bush BHAS01UR High Definition DVBT Terrestrial Receiver. The password may be required when you attempt to modify some advanced settings. The default password is “000000”. Main features and functions This product is a high definition digital set top box. It fully complies with DVB-T receiver requirement specifications.
BHAS01UR 16 Supports Teletext (where broadcast) 17 Subtitles supported based upon availability on the network 18 Channel editing functions (Favorites, Move, Lock, Delete) 19 Supports HDMI High Definition Multimedia Interface (HDMI 1.) 20 USB 2.0 Input supports mp3, wma, jpeg and bmp media playback and Software Upgrade. 21 Audible feedback supported Remote control The remote control is shown below and the button functions are listed in the table on page 6.
BHAS01UR Key legend Home TV: STB TV/Radio Swap TV Input Vol + Vol P+ P- OK Guide Back Info Exit Help Text Menu Colour Buttons (red, green, yellow, blue) Numbers (0-9) FAV SUB 6 Description Press at any time to return to the first scanned in Channel Once programmed to TV will switch the TV between On and Standby Switches the Set Top Box between On and Standby: Press to Mute all audio Switch between TV and Radio mode Reverts to the previously viewed channel Once programmed to TV will switch between TV inpu
BHAS01UR Battery installation Insert the batteries while observing the correct (+) and (-) polarities as illustrated below: About the batteries: • If the remote control unit fails to work even when it is operated near the set top box, please replace the batteries. • Use size 2 x (AA) batteries. Notes: • Do not use rechargeable batteries. • Do not place the batteries near a heat source such as a heater or fireplace. • Do not mix old and new batteries.
BHAS01UR Programming your learning remote control Your remote control is set to work your digital set top box only. However, it is possible to programme it to also control your TV set, so that you only need to use one remote control. When you have programmed your remote control, the following buttons will control your , and . TV , Programming your remote control using the four digit code Find the make of your TV in the code table listed from page 33 of this instruction manual.
BHAS01UR b) If you ever want to change these buttons back to controlling the volume and mute of your digital box, press both the button and the button (at the same button flashes four times. time) and hold them down until the light under the Your remote control will now work the volume and mute functions of your digital box. Programming using the search facility 1 Make sure that you are pointing the remote control at the TV and not your digital box.
BHAS01UR Front and rear panels Rear panel R L CVBS CAUT ON R SK OF E ECTR C SHOCK DO NOT O EN ON TO TV RF IN RF OUT Pr Pb Y S/PDIF HDMI USB RF IN Aerial Input RF OUT Output of Digital Terrestrial TV Broadcast signal – e.g. to VCR/DVD Recorder TO TV RF Modulated Output – Connect an aerial from this socket to the TV if the TV has no other inputs other than the aerial input USB USB 2.
MENU
BHAS01UR Connect the STB receiver via composite video and audio (for standard definition viewing) 1 Connect the antenna to the ANT IN socket on the receiver. 2 Connect the receiver to the TV set via the red, white and yellow composite AV cables.
BHAS01UR Connect the STB receiver via YPbPr output and audio output (for high definition viewing) 1 Connect the antenna to the ANT IN socket on the receiver. 2 Connect the receiver to the TV set via the green, red and blue component AV cables (this will provide video), and the composite red and white cables (which will provide audio).
BHAS01UR Connect the STB receiver via HDMI (for optimum high definition viewing) 1 Connect the antenna to the ANT IN socket on the receiver. 2 Connect the receiver to the TV set via a HDMI cable. This will provide both video and audio.
BHAS01UR Connect the STB receiver via RF Modulator (for basic viewing) Note. This method is used when the TV has no other input other than the Antenna Input. 1 Connect the antenna to the ANT IN socket on the receiver. 2 Connect an antenna cable to the TO TV socket on the receiver from the set top box to the antenna input on the TV.
BHAS01UR Installation guide Ensure that all connections have been made properly, turn on the TV and make sure the receiver is connected to the Main Power. Make sure that the on/off switch on the back panel of the set top box is switched to on. Press the Power button on the front panel of the receiver to switch receiver on. If you are using the receiver for the first time or restored to Factory Default, the Installation Guide Menu will appear on your TV screen.
BHAS01UR Basic operation Program settings To access the Menu, 1 Press the MENU button. To access the program settings, 1 Select Program 2 Press OK. The Menu provides options to adjust the Program settings. 1 Select an option. 2 Press OK or RIGHT to adjust that setting. 3 Press the EXIT button to exit the Menu.
BHAS01UR Program Edit To edit your program preferences (Move, Skip, Lock, Delete or set as a Favourite), you will need to enter the Program Edit Menu. This Menu requires a password to access. Enter the default password ‘000000’.
BHAS01UR advance for every tuned channel (when broadcast). Press the EPG button on the Remote Control to access guide directly. You can use the LEFT/RIGHT to view what is on other channels. Press the green key to skip forward 24 hours, and the red key to skip back 24 hours. Press the INFO key to book programme reminders and the blue key to view more information on the selected programme.
BHAS01UR 2 The Menu provides options to adjust the video settings. 3 Press UP/DOWN to select an option. 4 Press RIGHT/LEFT to adjust that setting. 5 Press EXIT to exit the menu. Aspect Ratio Set the display format to one of the following to select the best display for your television 4:3 Full 4:3 Pan & Scan 4:3 Letter Box 16:9 Full Screen Auto. Resolution If the video does not appear correctly, change the setting. The default setting is to match the most common setting for HDMI, is 1080i.
BHAS01UR Channel search 1 Press MENU and select Channel. 2 Press OK. The Menu provides options to adjust the channel search settings. 3 Select an option and press RIGHT/LEFT to adjust the settings. 4 Press EXIT to exit the Menu.
BHAS01UR This option will search and install all channels automatically. This option overwrites all preset channels. 1. Select Auto Search and press OK or RIGHT to start channel search. 2. To cancel channel search at any time, press EXIT. Manual search This option allows you to install new channels manually. This option adds new channels without changing the current channels list. 1 Select Manual Search then press OK or RIGHT. The channel search screen will appear.
BHAS01UR Country Select your country of residence in the list displayed. Antenna power This function allows you to enable Antenna Power if an external active antenna is connected. Time setting 1 Press MENU 2 Select Time, and then press OK. The menu provides options to adjust the time settings. 3 Press UP/DOWN to select an option. 4 Press RIGHT/LEFT to adjust the setting. 5 Press EXIT to exit the menu.
BHAS01UR Country region Modify based on the region where the set top box is installed. Time zone May be customised when the time offset is set to manual. Sleep Allows the set top box to be programmed to switch off automatically after a set period of time. Daylight time May be modified when the time offset is set to manual to indicate whether the daylight saving time is active or not. Info timeout Customises the period of time that information boxes will appear on screen.
BHAS01UR Option 1 Press MENU and then select Option. 2 Press OK. The menu provides options to adjust multiple language and user settings. 3 Select an option and press RIGHT/LEFT to adjust the setting. 4 Press EXIT to exit the Menu. OSD language This setting allows you to customise the On Screen Display (OSD) Language from the nine languages available. Subtitle language If subtitles are broadcast in another language, you may select the language used to broadcast subtitles.
BHAS01UR Digital audio Modify the format of digital audio being output between PCM, RAW and Off. OSD Transparency Customises the transparency of the on screen display including information and the menu. Audible Feedback When turned on this function provides a beep via the audio to advise the user that the set top box has received the remote control command. System setting 1 Press MENU and select System. 2 Press OK. The menu provides options to adjust the system settings.
BHAS01UR Parental Guidance You can restrict access to channels by rating that are unsuitable for children. To restrict/lock the channel you will need to enter either the default password ‘000000’ or your own password (if you have modified it). Set Password 1 Select this option to change the password. 2 Enter your ‘old’ password or the default password ‘000000’. You will then be asked to enter a new password. 3 Re-enter your new password to confirm.
BHAS01UR Menu Lock When set to “On” each time the menu is accessed the password will need to be used. The default password is ‘000000’. USB This function provides the ability to playback multimedia or upgrade the set top box via the USB port. 1 Press MENU and select USB 2 Press OK.
BHAS01UR Multimedia Select to play back multimedia including music and photo files via USB. Photo Configure This allows the user to customise slide time, the mode that the slides appear via, and the image aspect ratio.
BHAS01UR USB Upgrade Allows the unit to be upgraded via USB (if required). Specifications Tuner Input Connector Input Frequency Range Number of RF Inputs Input impedance RF output Connector Loop through IEC 16902.
BHAS01UR Video Decoder Standard Transport stream Video decoding DivX Aspect ratio ISO/IEC 13818-2 and ISO/IEC 14496-10 ISO/IEC 13818-1 MPEG-2 SD/HD (MP@ML and MP@HL), MPEG-4 H.264/AVC SD/HD 3.X ~ 6.X JPEG,BMP,PNG, Motion JPEG 4:3, 16:9 Audio Decoder Standard Audio decoding Dolby Digital (AC-3) Sample rate ISO/IEC13818-3 TR1011154 MPEG-1 and MPEG-2 Layer I & II, Dolby Digital Audio, E-AC3,WMA and HE-AAC Digital Audio Stereo down-mixing to analog and digital audio outputs (including HDMI).
BHAS01UR Front Panel bi-colored LED 4-segments LED Keys Red / Green to indicate the various states of the STB To display the time, channel number or/and other information. POWER, MENU, P+, P-, VOL+ and VOL- keys.
BHAS01UR Learning remote control codes The codes below are for use with the BHAS01UR learning remote control. Identify your brand of television for use in programming the remote control.
BHAS01UR Celestial 0819 0820 0821 0767 Centrex 0780 0826 0891 0698 Changhong 1243 Conia 0754 0821 0894 1645 0820 1211 Daewoo 0634 0661 0499 0624 0374 1909 0037 0556 0009 0216 0218 0217 0451 0039 1137 1902 1908 0841 0880 1218 1307 1598 0876 1612 0865 0698 0714 0706 0778 Digitor 0037 0556 0888 0861 1497 DSE 0888 0861 1556 1497 0820 0767 0698 1682 Erae 1371 1191 Fujitsu 0179 0683 0853 0186 0809 0206 0072 0102 0314 0217 0163 0009 0352 0037 0556 0361 0259 Fujitsu Genera
BHAS01UR Hisense 0848 1363 1314 0208 0698 0891 0860 0780 Hitachi 1576 1037 0163 0194 0548 Humax 1295 1535 1539 JVC 0653 1153 0606 1653 0371 1053 0731 0683 0036 0190 0192 0193 0218 0418 0069 0093 0650 Konka 0037 0556 0371 0714 0418 0218 0641 0587 0754 0779 0894 0606 Lenoxx 1189 LG 0056 0178 1663 0037 0876 0377 0032 0009 0556 0714 0001 0217 0216 0431 0163 0606 0109 1934 0698 0715 0823 0829 1637 1146 1148 1191 1252 0247 0361 1718 1681 Loewe 0512 0633 07
BHAS01UR NAD 0056 0166 1156 0178 0865 0361 0163 NEC 0170 1174 0587 1170 1270 0036 0320 1519 0876 0056 0455 0009 0374 0217 0037 0556 0011 0704 0245 0237 1704 0499 0653 0771 1370 1135 0661 0882 1398 Nordmende 0109 0891 0501 0399 0196 0560 0343 0568 0195 0037 0556 0335 0163 0471 1248 0714 2001 0490 0443 1585 1667 1163 1308 NU-TEC 0455 0698 0820 0037 0556 0821 0706 0264 Orion 0179 0037 0443 0355 0714 0235 0556 0655 0294 0177 0320 0011 0009 0321 0211 0314 0102 0269 0077 0264 04
BHAS01UR 0861 0888 0753 1371 1191 1531 0826 1553 1594 1243 0698 0264 0714 1537 1384 1964 1248 1681 1556 Sanyo 0208 1208 0157 0292 0721 0036 0011 0370 1507 0339 0072 0216 0217 0104 0045 0555 0146 0009 0544 0163 0037 0108 0556 0486 0735 0893 0170 0704 1037 1667 1149 1163 1585 Schaub Lorenz 0548 1267 0714 0361 0349 0606 0486 0374 1191 1324 1194 1363 1371 1667 Sharp 0093 1193 0039 1586 1393 0157 0036 0491 1587 0818 0294 0653 0256 0193 0186 0516 0200 Sherwood 1399 Siemens 01
BHAS01UR Tevion 0894 1248 1298 1645 1556 0767 0808 1667 0865 1211 1585 Toshiba 1508 0508 0060 1656 0714 1945 0036 0502 0204 1935 0070 0102 0241 1164 1704 0217 0109 0490 0077 0195 0191 0618 1916 1908 0009 0698 0037 0736 0832 1556 0650 1156 1037 Toyoda 0009 0371 0276 0493 0264 ViewSonic 1755 1330 1542 1513 1511 Voxson 0087 0037 0556 0418 0163 0178 Yamaha 0650 0797 1526 1576 38
BHAS01UR Product warranty Keep your receipt or proof of installation as proof of purchase. This product is warranted for any defect in materials or workmanship for one year after the original date of purchase. This product is for normal domestic and office use only. This warranty does not cover damage from misuse or neglect, accidental damage, vermin infestation, excessive voltages such us lightning or power surges or any alternation that affects the performance or reliability of the product.
BHAS01UR www.bushaustralia.com.