Instruction Manual

Using your Freestanding Cooker
Getting the most from your appliance
Using your Freestanding Cooker
22
If you require any technical guidance or f nd that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Instructions for use (hob top burners)
The symbols on the control knobs mean
the following:
N
Maximum gas flow or ‘high’ flame and
lighting position
Minimum gas flow or ‘low’ flame
All operating positions must be set between the
maximum and minimum flow settings, and
never between the maximum setting and the
closed position.
Gas Burner Components
A Burner cap
B Burner Head
C Burner Bowl
D Thermocouple (where fit ed)
E Electrode
Controls
Control knob (Hob top Burners)
These parts can be removed for cleaning
periodically. After cleaning, they must be well
dried and correctly replaced. It is important to
check that the burner bowl and cap have been
correctly positioned. Failure to do so can cause
serious problems.
Upper and lower left cavity
Upper right cavity
60
220
200
180
160
140
120
80
100
MAX