Instruction manual Freestanding Cookers BRC100DHMB BRC100DHMSS
You’ll soon be enjoying your new Freestanding Cooker It all begins here, with your instructions. Don’t worry, there’s nothing too technical coming up. Just simple, step-by-step guidance to get you up and running quickly. Sound good? Then let’s get started. Help and Guidance We’re here to help you get the most from your Freestanding Cooker. Should you require any guidance, a simple solution can often be found online at: www.bush-support.
Contents 1 Safety information 2 3 4 5 Safety information 6 Getting to know your Freestanding Cooker Ready? Let’s begin 10 Accessories 12 6 Installing your Freestanding Cooker Care and Maintenance Cleaning 32 Removing the door 33 Replacing the lamps 33 Maintenance 34 Technical specific tions 35 Product support Troubleshooting 38 Help and assistance 39 Installation requirements 14 Data Label 14 Declaration of conformance to product standards 40 First Use 14 Disposal 40 Unp
Safety information 1
Safety information Important - Please read these instructions fully before installing or operating INSTALLATION WARNINGS DURING USAGE IMPORTANT: This product MUST be installed by a qualified Gas Safe registered installer in accordance with local regulations. Particular attention should be given to the ventilation requirements.
Safety information Important - Please read these instructions fully before installing or operating IMPORTANT: Position pans over the centre of the burners and turn handles to a safe position where they can not be knocked or grabbed. IMPORTANT: When the door of the oven is open, do not hang or lean anything on it. You may unbalance your appliance or damage the door or door hinges. IMPORTANT: Make sure the cooker control knobs are all in the off position when not in use.
Getting to know your Freestanding Cooker 2
Getting to know your Freestanding Cooker You’ll be up and running in no time Ready? Let’s begin... Please read these instructions carefully. They contain important information which will help you get the best from your Freestanding Cooker and ensure safe and correct installation and operation. If you require any further assistance, our technical experts are happy to help. For full details, refer to the product support section at the end of these instructions.
Getting to know your Freestanding Cooker You’ll be up and running in no time 6 4 5 3 1 1. LED programmable timer 2. Oven Door 3. Rapid Burner 4. Semi-rapid Burner 5. Auxiliary Burner 6. Trivets 7. Burner Control Knobs 7 2 10.Oven indicator light 11. Digital timer 12.Function/temperature knobs 13. Hob top burner knobs 12 10 11 13 1. 2. 3. 4. 5. 6. 7. 8.
Getting to know your Freestanding Cooker You’ll be up and running in no time Oven Accessories 2 1 1. Grill pan x 1 2. Wire shelf x 4 3. Grill pan wire insert and handle x 1 Other Accessories Included 1. 2. 3. 4.
Installing your Freestanding Cooker 3
RISK OF ELECTRIC SHOCK DO NOT OPEN Installing your Freestanding Cooker Bringing it all together Installation requirements Data Label THIS COOKER MUST BE INSTALLED ACCORDING TO BS 6172: 2010 BY A SUITABLY QUALIFIED GAS SAFE REGISTERED INSTALLER The Data Label is located on the rear of the appliance.This appliance is suitable for Natural Gas and Universal LPG; ensure that the available gas supply matches the Data Label and the gas type label.
Installing your Freestanding Cooker Bringing it all together Installation of Cooker Gas This modern cooker was manufactured with parts and materials of the highest quality and was designed to meet your cooking needs. You should read this manual so that you are able to use the cooker correctly and to avoid any potential problems with using the cooker. The following information outlines the required rules for correct installation and service of your cooker.
Installing your Freestanding Cooker Bringing it all together Gas Connection IMPORTANT - All Gas installations must be carried out by a suitably qualified person. For information on choosing a gas installer contact the ‘Gas Safe Register’. www.gassaferegister.co.uk The appliance can be placed close to other furniture on condition that the furniture’s height does not exceed the height of the cooker panel.
Installing your Freestanding Cooker Bringing it all together Anti-tilting chain The cooker is supplied with an anti-tilting chain to prevent the appliance from tilting forward and causing accidental damage to the gas pipe. Make a hole in the wall behind, at the same height as the fixing chain. Using the fixing assembly insert the plug into the hole and then screw in the ho until it is firmly fixed to the wall. Fix the chain to the hook.
Installing your Freestanding Cooker Bringing it all together Electrical connection IMPORTANT: Electrical connections must be carried out by a suitably qualified person and in accordance with all relevant local building and installation regulations. The electrical cable should not be routed through any area that may be affected by heat from the oven, especially the area directly behind the oven. 1. See the rating label at the rear of the product for the appliance’s load rating. 2.
Installing your Freestanding Cooker Bringing it all together Gas Conversion (NG to U-LPG) Setting the minimum level Parts needed - Test Point Assembly - Auxiliary Jet 0.5mm - Wok Jet 0.95mm - ULPG Gas Type label - Semi-Rapid Jet 0.65mm - Rapid Jet 0.85mm 1. Light one of the burners and turn the tap to minimum flame 2. Remove the control knob which controls the ignited burner.
Using your Freestanding Cooker 4
Using your Freestanding Cooker Getting the most from your appliance Controls Control knob (Hob top Burners) Instructions for use (hob top burners) The symbols on the control knobs mean the following: N Maximum gas f ow or ‘high’ flame and lighting position Upper left cavity & lower left cavity Minimum gas f ow or ‘low’ flame All operating positions must be set between the maximum and minimum f ow settings, and never between the maximum setting and the closed position.
Using your Freestanding Cooker Getting the most from your appliance To light the hob burners To light the burner, press the control knob fully down and hold the knob down before rotating anti clockwise to the High Flame position. The ignition device is integrated into the control knob and is automatically activated by pushing down on the control knob.
Using your Freestanding Cooker Getting the most from your appliance Positioning the oven trays & shelves The Baking Tray, Grill Tray or Oven Shelves can be located in any of the four height positions in the oven. When fitting the trays or shelves, ensure they are fitted between the two moulds inside the caivity that are closest together. Oven Shelves have a stop so that they are not fully withdrawn by accident.
Using your Freestanding Cooker Getting the most from your appliance MAIN OVEN COOKING MODES Convection mode When set to Convection mode, the top and bottom heating elements operate together like a ‘normal’ conventional oven that you have probably used before. Convection mode is best suited for traditional baking and roasting and you should only use one shelf at a time, otherwise the heat distribution will be uneven.
Using your Freestanding Cooker Getting the most from your appliance Programmable Timer This model has a digital display, 24hr clock with 3 control buttons. When the power is connected, the screen displays ‘AUTO’. Adjusting the digital clock For first use of cooker, the time must be set by using the digital timer. The time must be set every time the cooker has been reset by the mains.
Using your Freestanding Cooker Getting the most from your appliance The oven starts immediately, and ‘AUTO’ will flash. hen the finish time is eached, the oven automatically stops cooking. The alarm will ring and ‘AUTO’ will flash, p ess the button and the ringing will stop. When the button is pressed during semiautomatic cooking, the set cooking time is displayed. If the button is pressed and the time is set back to ‘O’, the semi-automatic setting will be cancelled.
Using the Grill Baking cakes Use the ‘Grill’ mode with the oven door closed, place the food on the centre of the grill pan, insert and fit the grill pan on either the 3rd or 4th shelf from the bottom. Note: only the central part of the top heating element operates for grilling. When baking cakes, always place them in a preheated oven. Make sure you wait until the oven has been preheated thoroughly (the indicator light will turn off).
Using your Freestanding Cooker Getting the most from your appliance Cooking pizza Cooking fish and meat For best results when cooking pizza: • Preheat the oven for at least 10 minutes. • Use a light aluminium pizza pan, placing it on the shelf supplied with the oven. Don’t use the dripping pan since this will extend the cooking time, making it diffic t to get a crispy crust.
Care and maintenance 5
Care and maintenance Looking after your appliance Cleaning WARNING! Isolate the power supply to the cooker and make sure that the oven is cool. Before cleaning your oven or performing maintenance, make sure that the cooking mode selection knob and the cooking temperature selection knob is set to ‘OFF’. To extend the life of your oven, it must be cleaned frequently. The inside of the oven should preferable be cleaned immediately after use, when it is still warm (but not hot), with warm water and soap.
Care and maintenance Looking after your appliance Replacing the oven lamps WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Remove the glass cover of the lamp-holder as shown below. Remove the lamp and replace with a lamp resistant to high temperatures (300°C) with the following characteristics: - Voltage: 220-240V Wattage: 25W Type: E 14 Replacement lamps are available from our Support Team.
Care and maintenance Looking after your appliance Routine maintenance Have the condition and efficiency f the gas pipe and the pressure regulator (if installed) checked periodically. If anomalies are found, do not repair components but have the faulty component replaced. To ensure good performance and safety, the gas regulator taps must be greased periodically. Periodic lubrication of the taps and any other appliance service must only be carried out by Authorised Personnel.
Care and maintenance Looking after your appliance Technical specification We apologise for any inconvenience caused by minor inconstancies within these instructions that may occur due to product improvements and development All images and drawings are for illustration purposes only. or online at www.bush-support.
Product support 6
Product support Help is always at hand Troubleshooting 1. I f no electrical functions appear to work, check the cooker isolation switch has not been turned off also check the fuse in the swi ch and the circuit breaker in you consumer unit 3. D O NOT ATTEMPT TO REPAIR THIS COOKER YOURSELF. CALL BUSH PRODUCT SUPPORT ON 01759 487838 OR CONSULT A GAS SAFE REGISTERED INSTALLER 2.
Product support Help is always at hand Help and assistance If you require any technical guidance or find that your Freestanding Cooker is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.bush-support.com If you still require further assistance, call one of our experts on 01759 487838*.
Product support Help is always at hand Declaration of conformance to product standards This appliance conforms to all relavant standards applicable to domestic appliances sold in the UK Disposal This appliance/fitting is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
Call us now and activate your 12 month guarantee Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don’t forget to register it with us today so we can provide you with our best possible after-sales service and useful updates. www.bushregistration.co.uk FREEPHONE* 0800 597 8548 Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.
Contact: www.bush-support.
