9”/22” HD Ready Digital LCD TV with built-in DVD Player Installation & Operating Instructions - Please keep for future reference 529/6015 529/6022 529/6974 529/8185 529/6981 BTVD91186B BTVD91186P BTVD91216B BTVD91216P BTVD91216W Important - Please read these instructions fully before installing or operating These instructions contain important information which will help you get the best from your television and ensure safe and correct installation and operation.
Contents Safety Information 3 - 4 Getting Started 5 - 12 Support 5 TV / DVD Features 6 Accessories included 6 Viewing remote control - TV 7 Viewing remote control - DVD 8 TV/DVD - control buttons (top view) 9 TV/DVD - jacks (left view) 9 TV/DVD - (right view) 9 Connecting a TV antenna 10 Connecting a power cord 10 Common interface 10 Remote control 11 Initial set up 12 Connections 13 - 14 Connecting a high definition (HD) source 13 Con
Safety Information Important - Please read these instructions fully before installing or operating CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The lightning flash with an arrowhead within a triangle alerts you to uninsulated dangerous voltage within the product’s enclosure that could cause an electric shock.
Safety Information Important - Please read these instructions fully before installing or operating Mains plug Units Supplied with Moulded Mains Plug 1. If the mains plug fitted to the AC cord supplied is not suitable for your mains outlet it may be necessary to cut it off. Carefully dispose of the severed plug. Under no circumstances must it be inserted into a mains socket, otherwise a dangerous electric shock could result. 2.
Getting Started The Argos Technical Helpline is here to help Technical experts are available 7 days a week • Simple help and advice on setting up your digital equipment (image). • Guidance on connecting other devices to your television such as a DVD player, Sky, home cinema system or a games console. • Order spare parts, including that lost remote control. • Any other technical issues you may need assistance with.
Getting Started TV - Features DVD - Features • Remote controlled colour LCD TV. • DVD / CD / CD-R / CD-RW / JPEG MP3 / / JPEG / MPEG playback. • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high definition signals. • 100 programmes from VHF, UHF (analogue). • 500 programmes for digital mode (IDTV). • OSD menu system. • Scart socket for external devices (such as video, video games, audio set, etc.). • Stereo sound system.
Getting Started Viewing remote control - TV 1. Standby/On button 2. TV/DTV button 3. Number (0 - 9) buttons 4. Reveal button (in Teletext) 1 15 2 16 17 5. Mute button 6. Volume (–/+) buttons 7. Cursor ( , , , ) buttons Enter / OK button 8. Hold button (in Teletext) 3 Mix button (in Teletext) 9. List button Guide button Information button 4 5 18 19 6 20 10. Size button (in Teletext) 11. Audio Language button 12. Text button (in Teletext) 7 13. Time button 14.
Getting Started Viewing remote control - DVD 1. DVD button 2. Number (0 - 9) buttons 3. Cursor ( , , , ) buttons Enter / OK button 4. Fast reverse button Fast forward button 5. Previou button 6. 1 2 Stop button 7. Angle button 8. Subtitle button 9. Title button 10. Goto button 11. Memory button 12. Clear button 13. Next button 14. Play button 15. Pause button 16. Slow button 17. Audio button 3 4 18. DVD Menu button 5 19.
Getting Started TV / DVD - control buttons (top view) 1. 2. – Volume + controls Adjust the volume level. CH buttons Press to change the TV channels and highlight selections (Up & Down) on the menu screen. button Press to select next title, chapter or track on a disc and fast forward playback. button Press to select previous titles, chapters or tracks on a disc and fast reverse playback. 3. Function button Select DTV, ATV, AV1, AV2/SCART, YUV/ SCART, DVD or HDMI. 4.
Getting Started Connecting a TV antenna To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - RF output of a cable system - RF output of a satellite system Note: For receiving over-the-air TV broadcasts, we recommend that you use an external roof antenna. Should you require the use of an indoor antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas.
Getting Started Remote control Using the Remote Control • Point the remote control at the REMOTE SENSOR located on the unit. • When using this unit in a very brightly lit area, the infrared REMOTE CONTROL SENSOR may not work properly. • The recommended effective distance for using the remote control is about 16 feet (5 metres). Battery Replacement When the batteries become weak, the operating distance of the remote control will be greatly reduced and you will need to replace the batteries.
Getting Started Initial set up The first time you turn the unit on, it will go straight into start-up screen. Simply follow the screen prompts as below to tune in the channels. 1. In the initial start-up screen, press ENTER/OK to enter next screen. (fig.2) Please press OK to continue fig.2 2. Use the , , , button to select a desired language, then press the ENTER/OK button to confirm. (fig.3) fig.3 3. Use the , , , button to select Country, then press the ENTER/OK button to confirm. (fig.4) fig.4 4.
Connections Connecting a high-definition (HD) source High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the YUV Scart adaptor to this unit, then connect component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (SCART and AUDIO IN).
Connections Connecting to sources with scart Devices with RGB output must be connected to the SCART input: Connects the SCART from the source to the corresponding SCART on this unit (SCART cable not included) as shown. Make sure you connect both to SCART to SCART. To operate the connected device and play the source, first press the FUNCTION or AV button to select the AV2/SCART mode.
Basic Features Electronic programme guide (EPG) for DTV While watching a DTV programme, you can press the GUIDE button to display the PROGRAMME GUIDE menu. (fig.1) • Press the or to scroll through the programmes of different channels. Press the or to skip to the programmes of different periods. (Note: Programme names in GREEN indicates that these programmes are now broadcasting on different channels.
Basic Features Analogue TV / DTV setup TV Setting (only in ATV or DTV mode) 1. Press the TV MENU button. . (fig.3) 2. Use the or button to select 3. Use the or button to select the options (Auto Tuning, DTV Manual Tuning, ATV Manual Tuning, Programme Edit), adjust them using the or button. Common Interface and Signal information are only available in DTV mode. 4. Press the TV MENU button to return to previous menu, repeat step 2 to adjust other settings. 5.
Basic Features Analogue TV / DTV setup - FAV (Favourite) Press the FAV button to set or cancel the selected channel as one of the favourite programmes. A “heart” will appear alongside the program set as a favourite. • Signal Information Display the signal information, such as channel name, network, modulation, quality and strength. • CI Information Display CAM and Smart card information; select the language if available. Picture menu 1. Press the TV MENU button. 2.
Basic Features Analogue TV / DTV setup Sound memu 1. Press the TV MENU button. 2. Use the or button to select the . (fig.6) 3. Use the or button to select the options (Sound Mode, Treble, Bass, Balance), adjust them using the or button. 4. P ress the TV MENU button to return to previous menu. 5. To exit the setup menu and return to the normal screen, press the EXIT button. Experiment with different sound settings until you find the settings you prefer.
Basic Features Analogue TV / DTV setup Setup menu 1. Press the TV MENU button. 2. Use the or button to select the . (fig.8) 3. Use the or button to select the options (OSD Language, Audio Language, Subtitle Language, Restore Setting, OAD), adjust them using the or button. 4. Press the TV MENU button to return to previous menu. 5. To exit the setup menu and return to the normal screen, press the EXIT button. • OSD Language : Select your preferred On Screen Display language.
Basic Features Analogue TV / DTV setup Lock menu 1. Press the TV MENU button. 2. Use the or button to select the . (fig.9) 3. Press the button to highlight Lock System then press ENTER/OK or or to enter, enter password to proceed. (The default password is 0000.) 4. Use the or button to select the options (Lock System, Change Password, Block Programme, Parental Guidance), press the ENTER/OK or / button to adjust. 5. Press the TV MENU button to return to previous menu. 6.
Basic Features Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext control buttons you can view pages of information that are listed in the teletext index. Analog and Digital text look very different and operate differently. Please Note Teletext is only transmitted on some channels. You will only be able to enter Teletext on these. To enter Text mode For Analogue text, press the TEXT button in ATV mode. For digital text, press the TEXT button in DTV mode.
Basic Features CD / DVD Operation This instruction manual explains the basic instructions of this unit. Some DVDs are produced with limited operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs. “ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted by the unit or disc. Playing a disc 1.
Basic Features CD / DVD Operation Pausing playback (still mode) Press the PAUSE button. To resume normal playback, press the PLAY button. Each time you press the PAUSE button, the picture advances one frame on DVD. Stopping playback Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button.
Basic Features CD / DVD Operation Angle selection (DVD) Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the current angle available. 2. Press the ANGLE button repeatedly to change the scene to the next angle in those recorded.
Basic Features CD / DVD Operation Repeat playback You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, Repeat all, A-B repeat) Repeating a chapter (DVD) You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ ” indicator displays on the screen. The current chapter is played repeatedly. Repeating a title You can play the same title repeatedly. 2.
Basic Features CD / DVD programmable playback Programmable memory The two types of programmed playback provided by this unit are title/chapter for DVD and track for CD. Track/Title/Chapter programmed playback 1. Press the MEMORY button. A screen will be shown as right. (fig.11) 2. Press the button to highlight the Title. Press the or button to choose the desired title. Press the button again to highlight the Chapter. Press the or button to choose the desired Chapter. Press the ENTER/OK button to confirm.
Advanced Features Customising the function settings Language setup 1. In Stop mode, press the SETUP button. 2. Use the or button to select the option Language Setup (fig.1), then press the button to move the highlight bar on OSD Language. 3. Use the button to move the highlight bar, then use the or button to select your preferred language, and press the ENTER/OK button to confirm. 4. Press the button to go back to the previous menu. Repeat steps 2 and 3 to adjust other options. 5.
Advanced Features Customising the function settings Video setup 1. In Stop mode, press the SETUP button. 2. Use the or button to select the Video Setup. (fig.2) 3. Press the button to highlight the TV TYPE and then press the button to enter the desired TV type. 4. Use the or button to select the desired TV type and press the ENTER/OK button to confirm. 5. To exit the SETUP MENU and return to the normal screen, highlight the Exit Setup Mode ( ) and press the ENTER/OK button.
Advanced Features Customising the function settings System setup 1. In Stop mode, press the SETUP button. 2. Use the or button to select the System Setup option. (fig.3) 3. Press the button to highlight the Default. 4. Use the or button to select the desired setup option. 5. To exit the SETUP MENU and return to the normal screen, highlight the Exit Setup Mode ( ) and press the ENTER/OK button. Parental Ctrl Password Default ... 1 2 3 4 5 6 7 8 Kid Safe G Pg Pg 13 Pg r R Nc 17 Nc Adult fig.
Other Information Installation Install / removing the stand WARNING: The LCD Display is very fragile, and must be protected at all times when installing / removing the stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. Do NOT put pressure on the front of the unit at any time because the screen could crack. 1. Disconnect any cables or cords connected to the unit. 2.
Product Support The Argos Technical Helpline is here to help Technical experts are available 7 days a week • Simple help and advice on setting up your digital equipment (image). • Guidance on connecting other devices to your television such as a DVD player, Sky, home cinema system or a games console. • Order spare parts, including that lost remote control. • Any other technical issues you may need assistance with.
Product Support Disc formats This unit can playback: DVDS [8cm/12cm disc] Audio CDS [8cm/12cm disc] CD-R/CD-RW Compatible Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this unit, this unit cannot play that disc.
Product Support Maintenance Cleaning the disc A defective or dirty disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. • Do NOT stick paper or tape on the surface of the disc. • Do NOT expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
Product Support Trouble shooting No power Why do I get ‘blocking’ on my digital picture? • Check that the AC power cord is connected. • The unit is not turned on. • In most cases, blocking is caused by a reception problem - either the signal is too weak or there is some kind of interference. Talk to your retailer or contact your local aerial installer The remote does not function • Remove any obstacles between the remote and the unit. • Use the remote near the unit.
Guarantee Product Guarantee This product is guaranteed against manufacturing defects for a period of Year This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.
811-918691W041 BTVD9xxx6_IB_BUSH 2011_Rev3.
