User manual

CD Micro with DAB and Bluetooth

You’ll be up and running in no time

Getting to know your CD Micro with DAB and Bluetooth

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

Check the package contents

The package contains:

• 1 x CD Micro with DAB and Bluetooth with an attached mains power lead and plug

• 2 x Separate speakers (1 x Left and 1 x Right)

• 1 x Remote control

• 1 x Instruction manual

Where to put your Micro

It is important that you consider carefully in advance where your Micro and speakers will

be situated and make sure that they are:

• on a flat and stable surface

Note: Never place your Micro directly onto antique or polished surfaces.

• within 1.4 metres of a power socket. Please ensure that the mains power lead and

speaker cables are not a trip hazard.

• at least 1 metre away from other electrical appliances to avoid interference

• where it will be in range of the connected or ‘paired’ bluetooth device (e.g. iPod/

iPhone/iPad/Android/other phone/Computer), which is about 10 metres or less (33

feet or less) in line of sight.

• where you can fully extend the wire radio aerial

Setting up

1. Connect the speakers to the Left and Right speaker sockets on the back of the Micro.

Please note that the speakers are shaped and so you will need to view them from the

front before you connect them to the speaker sockets.

2. Fully extend the wire radio aerial on the back of the Micro to receive the best possible

radio reception and sound quality.