User manual

CD Micro with DAB and Bluetooth
You’ll be up and running in no time
Getting to know your CD Micro with DAB and Bluetooth
15
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
3. Plug the mains power plug into the mains power wall socket and switch on. Your
Micro will now be in ‘Standby’ mode.
4. Pull out the safety strip on the remote control to activate the battery.
Switch on
Press and release the ‘Power’ button on the Micro or the button on the remote control
to Switch on .
The first time you use the Micro or if the DAB station list is empty, your Micro will
automatically begin to scan for DAB radio stations.
Note: Always make sure that the wire aerial on the back of the Micro is fully extended
before your Micro scans for DAB radio stations, to ensure the maximum signal strength.
Switch o
Press and release the ‘Power’ button on the Micro or the button on the remote control
to go to Standby mode.
To completely power off the Micro, switch off the mains power at the wall socket.
Change the mode
Press and release the ‘Mode’ button on the Micro or on the remote control to change the
mode.
DAB Radio, FM Radio, CD, Bluetooth and AUX modes are available.
Please check the display, which will confirm the mode.
Adjusting the volume
Turn the rotary volume control on the front of the Micro to adjust the volume. Turn
clockwise to increase the volume and anti-clockwise to decrease the volume. You can
also adjust the volume using the ‘Vol+’ and ‘Vol-’ buttons on the remote control.